Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Impact Windows in Stuart: What to Know First
We install, replace, and service PGT impact windows in Stuart as an independent PGT service provider, and most single-window repairs are done in one visit, usually within a week of your call. A PGT replacement window in Stuart generally runs $900 to $2,400 per opening depending on the series, size, and whether the frame gets replaced or reused. TruePane Windows & Doors is not affiliated with or authorized by PGT, but we’ve been setting and sealing their products along the Treasure Coast long enough to know exactly how they age in salt air. If you own a home in Stuart, Sewall’s Point, Palm City, or Rio and your PGT windows are fogged, sticking, leaking, or failing to lock true, call (754) 324-4646 and we’ll give you a straight read on whether it’s a repair or a replacement.
How PGT Products Fail - and How We Fix Them
PGT builds a solid impact window, but every product line has its own set of wear points. In Stuart’s heat and salt air, these are the ones we see most often:
- PGT WinGuard aluminum frames with seized rollers. The original rollers on WinGuard single-hung and horizontal sliders from the mid-2000s are nylon-tired, and after fifteen years of Stuart humidity plus salt, the tire delaminates and the roller binds. The window still opens, but you’re fighting it. We replace the roller assembly with a stainless-and-delrin aftermarket set that outlasts the OEM part, and we clean the track out properly instead of just greasing over the corrosion like some crews do.
- PGT 5500/7700 series fogged insulating glass. The 5500 and 7700 impact lines use a dual-seal IG unit, and when the outer seal fails, you get that cloudy haze between the panes that never wipes off. In Stuart, the cycle goes faster than the manufacturer’s warranty math suggests, because the southeast exposure catches full sun all afternoon and the frame collects salt that accelerates seal breakdown. The glass is still impact-rated, but once the seal’s gone, the coated Low-E layer starts degrading. We measure the opening twice, order the exact IG make-up, and swap it under both warranty layers when PGT’s coverage still applies.
- PGT SGD885 sliding glass doors that bind in July. The SGD885 is a big, heavy impact door, and when it’s set even slightly out of level, the frame expands in Stuart’s summer and the door starts dragging. The homeowner thinks the rollers are shot, but half the time the real problem is that the rough opening wasn’t shimmed true on install day. We check the opening before we blame the hardware, and we’ve seen enough of these to know the difference in about ten minutes of inspection.
- PGT 5400 casement operators that loosen at the hinge arm. The 5400 casement series is a good window, but the operator arm fasteners back out over time from repeated operation and wind vibration during summer storms. The symptom is a crank that feels spongy for a quarter turn before it bites. Tightening the screws is a ten-minute fix, but if a previous homeowner cranked through the looseness, the operator gear is stripped and the whole unit needs replacing. We carry both the OEM operator and a stronger aftermarket replacement so you’re not waiting on a weeks-long backorder for a window that won’t close.
- PGT vinyl line (Spectrum and 2200) frame bow near the meeting rail. PGT’s vinyl impact windows are thermally efficient, but in direct Martin County sun, dark bronze exteriors absorb enough heat to bow the frame slightly. The window locks and unlocks fine in February, but by August the meeting rail doesn’t align and you can’t throw the lock. The real fix is not forcing the lock; it’s correcting the shim point and confirming the frame’s square. We’ve resolved more of these by resetting the installation than by replacing the sash.
Our PGT Impact Windows Process
- 1
Call and talk to a person. A live person answers (754) 324-4646 around the clock. You describe what the window’s doing, and we schedule a measurement visit at a time we’ll actually show up for.
- 2
We measure every opening twice. Dale Kessler grew up learning that if the opening is right, the rest is just doing the work, and that rule still runs the company. We check square, level, plumb, and the condition of the rough opening before we quote anything.
- 3
Parts decision in writing. If PGT’s factory warranty still covers the part, we register that claim and order the OEM component. If it’s out of warranty or the OEM part is the weak point, we quote a quality aftermarket alternative side by side and tell you which one we’d put in our own house.
- 4
The repair or replacement. Our techs are background-checked, uniformed, and trained on PGT’s specific installation tolerances. The work gets done in one visit on most jobs, with no surprise line items on the bill.
- 5
We test, then you test. Before we pack up, we cycle the window or door through its full range, check the lock engagement, and run water along the exterior seam if there’s any question about the seal.
- 6
Everything in writing. The Done Right Promise and both manufacturer warranty layers get registered before the truck leaves your driveway, with durations stated and no fine print that covers neither.
What PGT Impact Windows Costs in Stuart
Here’s what PGT impact window work typically runs in Stuart and the surrounding Martin County market:
- Single PGT 5500 or 7700 replacement sash: $900-$1,600 per window, installed.
- Full-frame replacement, standard opening up to 40×60: $1,400-$2,400 per opening, depending on stucco repair and interior trim.
- PGT SGD885 sliding glass door replacement: $3,200-$5,800 installed, with labor and haul-away included.
- Roller or operator replacement on a single window: $110-$340, parts included.
- Fogged IG unit swap on a PGT 5500/7700: $700-$1,500 depending on size and glass make-up.
What moves the price is the same list every honest glazier will give you: the series, the glass package, whether the frame gets reused or replaced, and how the original install was done. A window that went in square comes out without a fight; one that got forced into a rough opening somebody didn’t measure right will cost more in labor because we’re correcting their work before we start our own. Call (754) 324-4646 for a free estimate, and we’ll give you the number before we book anything.
Why Stuart Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been serving Stuart and Martin County since Dale Kessler opened the shop in 2008, building on a family trade that goes back more than four decades in the area. That’s long enough to know which PGT windows hold up in this climate and which ones need watching by the fifth year. We’re an authorized installer for more than a dozen manufacturer lines, including CGI, CWS, ES Windows, and ECO Window Systems, so if replacing the PGT unit outright makes more sense than repairing it, we’ll quote those side by side and show you the numbers on paper. Every job carries the Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing. And when you call, a person answers, because the phone ringing into a voicemail tree is exactly the kind of company we set out not to be.
FAQs
PGT’s written warranty coverage depends on the series, the original purchase date, and whether you’re the original homeowner, and we check all of that before we order a single part. If it’s covered, we handle the claim paperwork and install the OEM part; if it’s not, we’ll show you the aftermarket option and the price before any work starts. Call (754) 324-4646 and we’ll look up your specific window by the sticker codes on the frame.
In most cases we can replace just the insulating glass unit inside the existing PGT frame, which keeps the replacement under $1,500 for nearly all sizes. The frame itself is almost always sound, and swapping only the IG unit preserves the frame’s original fit to the rough opening. Call us for a free measurement and we’ll confirm whether your sash qualifies.
OEM PGT parts for current production lines usually arrive to Stuart in two to four weeks from the factory, while common aftermarket equivalents are often in our shop or available within days. On a genuinely failed impact window that won’t close or lock, we’ll tell you the wait for both options and let you decide which one fits your situation. Call (754) 324-4646 and we’ll check availability while you’re on the phone.
Repair makes sense when the frame is square, the glass is intact, and the failure is in the hardware or a seal; replacement makes sense when the frame has corroded, the glass is cracked, or the window has moved out of true enough that re-shimming is the only correct fix. We’ll give you the straight answer in writing, with the numbers for both paths, and no upsell on glass you don’t need. Call for a free estimate and we’ll walk the job with you.
Martin County has specific building code requirements for impact-rated fenestration in wind-borne debris regions, and we pull the permit, schedule the inspection, and stand behind the work through final approval on every job where one’s required. You won’t have to chase a permit office or explain to an inspector why somebody’s work doesn’t match the plans. Call (754) 324-4646 and we’ll tell you exactly what your project triggers before we quote it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Stuart and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.