Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Roof Replacement & Installation in Stuart: What to Know First
Roof replacement and installation for CWS-equipped homes in Stuart runs between $650 and $2,400 for most residential jobs, depending on whether we’re setting new glazing, rebuilding a curb mount, or replacing failed sealant around a CWS unit. We’re an independent CWS service provider, not a factory-authorized dealer, which means we can tell you plainly when a CWS skylight or roof window needs full replacement versus a targeted repair. Most CWS roof work in Stuart is done in one visit, and the estimate is free.
This page is written for CWS owners in Stuart and the surrounding Martin County communities: Rio, Jensen Beach, Palm City, Port Salerno, Sewall’s Point. If you’re calling about a CWS roof window that’s clouded, leaking, or starting to bind, call (754) 324-4646 and we’ll schedule a look.
How CWS Products Fail - and How We Fix Them
- CWS 7000 Series curb-mount skylight sealant failure. Stuart’s salt air and afternoon thunderstorms work on the exterior sealant bead faster than CWS owners expect. The first sign is usually a faint water stain on the interior drywall below the unit, not a drip. By the time you see a drip, the sealant has failed completely. We strip the old bead, clean the curb, reapply a marine-grade sealant rated for coastal Florida, and reset the unit. The fix holds when the prep is done right; most failures we see are from installers who skipped the cleaning step.
- CWS 5000 Series flashing and curb rot. On older Stuart homes with wood curbs, the flashing can corrode where it meets the roof deck. We regularly see galvanic corrosion around the fasteners where salt exposure has accelerated the breakdown. We replace the curb assembly when needed, pressure-treated and wrapped, and set the CWS unit on a new flashing kit before resealing.
- CWS venting skylight operator arm wear. The 5000 Series venting units use a small operator mechanism that gets stiff in Stuart’s humidity. Homeowners often assume the unit is rusted shut. Usually it’s just the arm that’s worn, and we can replace the operator assembly without pulling the entire skylight. That saves real money.
- CWS glass unit seal failure. Most CWS glazing in Stuart shows its age first as interior fogging, especially in south-facing roof positions where the thermal cycling is hardest. Once the seal between the panes breaks, no repair restores the glass. We remove the old unit, measure the opening twice, and set a new sealed glazing unit, typically an energy-efficient unit that outlasts the original.
- Interior condensation mistaken for failure. A lot of CWS owners in Stuart worry when they see condensation, and in most cases the skylight itself is fine. It’s a ventilation issue, not a seal issue. We inspect first and tell you whether you need a repair at all. That’s the square deal.
Our CWS Roof Replacement & Installation Process
Here’s how a CWS job goes from first call to finished install, step by step:
- 1
You call (754) 324-4646. A live person answers. We listen, schedule a time that works, and show up when we say.
- 2
On-site inspection. We inspect the CWS unit from roof and interior, checking curb, flashing, glass seal, and operator. We measure the rough opening carefully, per Dale Kessler’s practice from his years reading openings along the Treasure Coast.
- 3
Diagnosis and written quote. We tell you exactly what’s wrong, what needs to be replaced versus repaired, and what it costs. No surprise line items later. We’ll note if the CWS unit is still repairable, and if not, we walk through options side by side.
- 4
Parts decision. If the CWS unit is being replaced, we discuss OEM-equivalent glazing and aftermarket alternatives. We don’t push glass you don’t need. You approve the plan on paper before we touch anything.
- 5
The work. Our uniformed, background-checked technicians do the removal, prep, and set in one day. The surrounding roof surface is protected, and the work area is left clean.
- 6
Test and guarantee. We run water and seal verification before we leave. Then both the workmanship and the written warranty layers are registered. If it’s not done right, we make it right, no arguing.
What CWS Roof Replacement & Installation Costs in Stuart
Here are the ranges we typically see in Stuart for CWS roof work. The final number depends on the roof pitch, the curb condition, and whether the interior trim needs matching.
- Sealant reseal around an existing CWS skylight: $180-$350
- Operator arm replacement on a CWS venting unit: $220-$420
- Full CWS fixed skylight replacement (unit and install): $650-$1,300
- Full CWS venting skylight replacement with new curb flashing: $1,100-$2,400
What moves the price most is curb condition. Coastal Stuart homes with older wood curbs often need the curb rebuilt before the new CWS unit goes in, and that’s the right way to do it. We’ll show you the line item separately so you know what you’re paying for. Call (754) 324-4646 for an exact quote; estimates are free and the number on the paper is the number you pay.
Why Stuart Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been serving Martin County’s homeowners since 2008, and Dale Kessler opened TruePane in 2008 to fix the sloppy installs that keep making warranties worthless. The Keystone Standard is our way of doing that: both manufacturer warranty layers registered in writing, durations stated, before we leave the driveway. Every CWS job is covered by the Done Right Promise; if the opening is right, the rest is just doing the work. We’re here because we plan to be in Stuart thirty years from now. We also service the other lines Stuart homeowners have installed: PGT, CGI, ES Windows, and ECO Window Systems. So when a CWS owner asks whether the new glazing we set will still be true in ten years, the answer isn’t a sales pitch. It’s a proven practice.
FAQs
Yes, in many cases we can reseal a CWS unit, replace the operator arm, or rebuild flashing without replacing the entire skylight. We’ll tell you if replacement is actually necessary; we don’t recommend work CWS doesn’t need. Call (754) 324-4646 for an inspection and we’ll go over your options in writing.
If the CWS unit is still under factory warranty, any repair by a non-authorized provider may affect that coverage. As an independent CWS service provider, we tell you up front when a repair or replacement might touch warranty language, and we register our own workmanship guarantee in writing. We want you to know exactly where you stand.
We schedule CWS inspections promptly, and most Stuart jobs are completed in a single visit. We don’t promise same-day service on roof work; we promise a live answer on the phone and a visit at a time we’ll honor. Call (754) 324-4646 to schedule.
If the sealed glazing unit is fogged or failed, we replace the glass unit itself, not the entire CWS frame, as long as the curb and flashing are still sound. That’s usually the lower-cost fix. We measure the opening carefully and set new glazing that meets the original thermal spec.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Stuart and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.