Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom Windows & Doors in Stuart: What to Know First
We provide independent PGT custom windows and doors in Stuart, from oddly shaped transoms to oversized sliding glass walls, with most jobs quoted within 48 hours and installed inside three weeks. We’re not the cheapest bid in town, and we won’t pretend to be. What we offer is a square deal: line-item pricing on paper, both warranty layers registered before our truck leaves your driveway, and a Done Right Promise in writing. If you own a PGT window or door that’s binding, fogging, or just never fit right from the day it was installed, this page is written for you. Call (754) 324-4646 and a live person answers.
How PGT Products Fail - and How We Fix Them
As an independent PGT service provider, we see the same failure patterns repeat across Stuart homes. Here’s what actually goes wrong, and what we do about it.
- WinGuard aluminum frames pulling out of square - PGT WinGuard impact windows are heavy. In older Stuart block homes, we regularly find frames that were shimmed wrong at the header, so the sash binds in the corner by August. The fix is removing the trim, resetting the frame with proper shims at every anchor point, and resealing. If the opening is right, the rest is just doing the work.
- Custom radius windows losing their seal - PGT’s custom radius and arch top units look beautiful for about eight to ten years in Florida humidity. Then the desiccant in the spacer saturates and you get that milky fog between the panes. We rebuild the IGU rather than slapping a used sash in, because the glass is cut to a specific radius and an off-the-shelf replacement won’t sit flush.
- Sliding glass door rollers on 5700 and 7700 series - The factory rollers on PGT sliding doors are adequate for the first five years. After that, salt air off the St. Lucie works into the bearing and the door starts dragging like it’s full of sand. We replace them with quality aftermarket rollers rated for coastal exposure, not the same OEM part that will fail again on the same schedule.
- SDL grille clips loosening on large fixed units - PGT’s simulated divided lites are held with snap-in clips. On oversized fixed windows, the aluminum expands and contracts enough in a single Stuart summer to work those clips loose. The grille starts rattling on windy afternoons. We re-secure with upgraded clips and a bead of structural adhesive, which is a warranty-safe repair that holds.
- Vinyl lines (Spectrum, ClassicVue) warping in direct sun - PGT’s vinyl windows are fine products, but a west-facing wall in Stuart bakes them. We see the jamb liners curl and the sash channels pinch. Sometimes it’s a replacement liner and a tune-up. Sometimes the honest answer is that the vinyl has lost its shape and the window needs replacing. We’ll tell you which one it is before we quote you either.
Our PGT Custom Windows & Doors Process
- 1
You call, a live person answers. Not a voicemail tree, not a callback form. We ask what you’re seeing, take your address, and schedule a visit that same week in most cases.
- 2
We measure every opening twice. Dale Kessler will tell you a rough opening tells the truth if you’re willing to listen. We measure ceiling to floor, corner to corner, and check for settling before we order or fabricate anything.
- 3
We quote on paper, side by side. If it’s a repair, we show you OEM versus quality aftermarket parts and what each costs. If it’s a new custom unit, we quote PGT alongside Andersen, Pella, or CGI so you see the difference in writing.
- 4
We do the work in a single visit when possible. Most PGT repairs and custom replacements are completed the day we start. No second appointment left hanging, no surprise line items on the bill.
- 5
We test and we register. Before we leave, we run the window or door through its full travel, check the seal with a feeler gauge, and make sure it locks square. Both manufacturer warranty layers get registered in writing, durations stated.
- 6
You get the Done Right Promise. If something is not done right, we make it right. No paperwork, no arguing.
What PGT Custom Windows & Doors Costs in Stuart
Every job is different, but here’s what PGT custom work typically runs in Martin County:
- Custom radius or arch window replacement: $1,100-$2,800 per unit, depending on glass package and frame material.
- Oversized fixed window (60+ inches) with SDLs: $1,400-$3,200 installed.
- Custom sliding glass door, PGT 7700 series: $2,500-$4,800 installed, including new rollers and threshold.
- IGU replacement for a fogged PGT window: $300-$750 per sash, depending on size and Low-E coating.
- Full-house custom window package on a Stuart ranch home: $18,000-$42,000 depending on count, sizes, and impact rating.
What moves the price: impact rating, Low-E glass, frame material, and whether we’re working with an existing opening or building new. You get a fixed number before work starts, and that number does not change once we begin. We also offer a permanent 5% discount for seniors and veterans. Call (754) 324-4646 for a free estimate.
Why Stuart Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been at this since 2008, and we plan to be here in thirty more. TruePane hires local, trains apprentices into journeymen, and sponsors county fairs and church roof funds because we’re a Stuart company, not a franchise playbook. Our technicians are background-checked and uniformed, and they work in your home the way they would work in their own mother’s. When we come out for PGT work, we bring real PGT knowledge, but we’re not married to one brand. If a Andersen, Pella, or CGI product does the job better for your house, we’ll tell you and quote it side by side. We stand behind every job with the Done Right Promise, and we register both warranty layers in writing before we leave. Done right, on the first visit, in writing. That’s the standard.
FAQs
No. As an independent service provider, we perform warranty-safe repairs using compatible parts and documented methods. What voids warranties is poor installation, unapproved modifications, or deferred maintenance. We register both warranty layers in writing after every job so you have proof of the work done. Call (754) 324-4646 for a specific answer about your window.
Most custom PGT orders arrive in two to three weeks from the date we confirm your order. Repair parts, like rollers or IGUs, are usually in hand within five to seven business days. We’ll give you a written timeline with your quote, and we’ll be there when we say.
Most issues can be repaired. Fogged glass, worn rollers, loose grilles, and binding sashes are all repairable in most cases. We’ll tell you honestly if a window has reached the point where replacement costs less in the long run. You won’t get upsold on glass you don’t need.
WinGuard aluminum impact windows, the 7700 sliding door series, and vinyl lines like Spectrum and ClassicVue are the most common PGT products in Martin County. Each has its own failure patterns, and we know what to check first on each one.
Yes. We don’t leave an opening with exposed framing or mismatched trim. Exterior and interior trim is finished and painted to match before we call the job done. If something looks off when we’re through, the Done Right Promise covers it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Stuart and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.