A TruePane company - serving Stuart, FL

Windows & Doors Cost Breakdown: The Stuart Homeowner's Reference for 2026

Last updated August 27, 2026

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

Single hungDouble hungHorizontal roller

Casement
Casement
Bay & bow
Bay & bow

Sliding glass doors

Entry doors
Entry doors

Impact garage doorsPGTCGI

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Windows & Doors Cost Breakdown: The Stuart Homeowner’s Reference for 2026

Here’s a number that catches most Stuart homeowners off guard: a mid-range vinyl window replacement in Martin County costs nearly 40% more today than it did five years ago. The glass itself hasn’t changed much. What changed is the cost of aluminum framing, the labor market for experienced installers, and the stricter 2024 Florida Building Code requirements for wind-load ratings and impact resistance. If you’ve been putting off replacing those fogged windows or that sliding door that sticks every July, this guide gives you the straight numbers for 2026, the factors that move them, and the questions that keep you from paying too much for too little. We’re TruePane Windows & Doors, we’ve been setting and servicing glass in Stuart since 2008, and this is the reference we wish every homeowner could read before the first quote gets written.

Call (754) 324-4646

Quick Answer

In Stuart, expect to pay roughly $650-$1,200 per window installed for mid-range vinyl or aluminum units, $900-$2,400 per window for impact-rated options, and $1,500-$12,000 for doors depending on the type, material, and hurricane rating. A full-house window replacement (10-15 windows) typically lands between $9,000 and $22,000 in 2026. Labor runs about 30-40% of the average quote, and the single biggest variable is whether you’re buying standard glass or Miami-Dade-compliant impact glass, which Florida code requires for most openings on homes built before 2002 when you replace more than 25% of the glazing.

Table of Contents

Average Window and Door Costs in Stuart for 2026

Let’s get the numbers down so you can compare quotes with confidence. These are the ranges we’ve seen across Stuart, Jensen Beach, Palm City, and Hobe Sound through the last twelve months, and they hold steady for 2026 pricing:

  • Standard single-hung replacement window (vinyl, 36″ x 48″): $620-$850 installed
  • Standard single-hung replacement window (aluminum, 36″ x 48″): $680-$925 installed
  • Impact-rated single-hung (vinyl or aluminum): $950-$1,650 installed
  • Double-hung window (non-impact): $700-$1,100 installed
  • Casement window (non-impact): $800-$1,400 installed
  • Picture or fixed window (non-impact): $550-$1,300 installed, based on glass area
  • Impact picture window: $1,200-$2,400 installed
  • Full-house replacement (10-14 windows, mid-range): $9,000-$18,000
  • Full-house replacement with impact glass: $14,000-$26,000
  • Entry door (steel or fiberglass, standard 36″ x 80″): $1,500-$3,800 installed
  • Impact-rated entry door: $2,800-$5,500 installed
  • Sliding glass patio door (6-foot, non-impact): $1,800-$3,200 installed
  • Impact-rated sliding door (6-foot): $3,200-$5,800 installed
  • French door pair (non-impact): $2,800-$5,000 installed

These numbers assume a straightforward swap where the existing opening is sound and no rotten framing, termite damage, or stucco repair is needed. Stuart’s older neighborhoods, like the streets off East Ocean Boulevard and the riverfront homes built in the 1950s through 1970s, often carry extra framing costs because the original openings were not built to today’s Florida Building Code. Add 10-15% to any quote when custom sizes, structural lintels, or stucco patching are involved.

What Actually Drives the Price

The difference between a $700 window and a $1,700 window is rarely the sales pitch. It comes down to five variables, and you should see all five itemized on any quote from a serious installer.

1. Glass Package

The single biggest cost lever in Stuart. Standard annealed glass with a Low-E coating runs the least. Laminated impact glass costs 60-120% more per pane. And a window with an insulated glass unit (two panes, argon-filled) sits in the middle. If the window faces morning or afternoon sun, Low-E is worth it. If it faces the Intracoastal or the ocean, count on impact, and price accordingly.

2. Frame Material

Vinyl is the budget-to-mid-range standard and does fine in Stuart’s humidity. Aluminum is the workhorse for impact-rated frames and modern architectural lines, running 10-20% more. Wood and wood-clad units run 40-80% more and require the most maintenance in salt air, which is why you don’t see them often east of US-1. Materials matter less than the flange seal and flashing job.

3. Size and Configuration

A 24″ x 36″ bathroom window costs far less than a 72″ x 60″ picture window, not linearly, because glass area drives both material cost and labor. Custom shapes, arches, radius corners, and oversized sliders all add. On a typical Stuart ranch house, the mix of standard sizes keeps costs moderate. On a two-story Mediterranean or a custom riverfront build, every window is a special order.

4. Labor and Flashing

A window installed wrong will leak in a hurricane and fog in a dry month. Labor costs in Martin County run $150-$350 per opening for a standard replacement. Impact-rated installs take longer because the anchoring requirements are stricter: more tapcons, more mastic, more patience. Do not hire a crew that quotes under $100 per opening on impact work. You’re buying their shortcuts.

5. Code Compliance and Permits

Stuart enforces the Florida Building Code 8th Edition (2023), including HVHZ requirements for wind-borne debris protection. If you’re replacing more than 25% of the total glazed area on a home, or if you’re on a barrier island or within the wind-borne debris region, you’re almost certainly replacing with impact-rated openings. A Mainland home may also need impact protection if local amendments have tightened since the original build. Permits run $50-$250 per opening in Martin County, and a legitimate installer either pulls them in the bid or breaks them out as a line item. If the quote doesn’t mention permits at all, that installer is planning to skip them, and you’ll find out when the next re-inspection catches it.

Impact Windows: The Stuart Reality

Stuart sits on the Treasure Coast, and our building department has no mercy if you build it out of true. Impact windows are not optional window dressing here. They are the single most common upgrade we install, and the price reflects what goes into them:

  • Laminated glass: two panes bonded with a PVB interlayer that holds together when a 2×4 hits it at 34 mph in the test lab. This is the barrier, and the interlayer is the expensive part.
  • Heavy-duty frame: aluminum or reinforced vinyl designed to take the load test, not just hold the glass.
  • Anchoring schedule: the exact screw pattern and spacing mandated by the product approval. Skip one anchor and the product’s NOA (Notice of Acceptance) is void.
  • Mullion reinforcement: where windows are joined, hidden steel or composite reinforcement carries the structural load.

When we quote impact windows for a home in Rio or North River Shores, the line items look different than a quote for a home in Central Stuart proper because of the exposure category. Homes within one mile of the coast or on the barrier island (Sewall’s Point, Hutchinson Island) carry the highest design pressure ratings. The glass gets thicker, the frames get heavier, the anchoring gets denser, and the price climbs another 15-20% over an inland impact installation. We’ve flagged that on enough job sheets to know it’s the part of the quote homeowners push back on, until we show them the product approval drawing. Then they get it.

One more Stuart-specific note: impact windows change your homeowner’s insurance picture. Most underwriters in Martin County issue credits for impact-rated openings, often 10-30% of the wind premium depending on the carrier and policy. That is a real, recurring number to run against the upfront cost. A $20,000 impact package that saves $900 a year in premium pays for itself inside a decade, and Stuart insurance rates are not trending downward.

Entry, Patio, and Sliding Door Costs

Doors fail differently than windows in our climate. The sun bakes the east-facing panels, the humidity swells the jamb, and the salt air eats the hinges. A Stuart homeowner will usually replace an entry door because it binds, a patio door because the rollers die, or a slider because it now takes two hands and a knee to open. Here’s what that costs in 2026:

Entry Doors

  • Steel entry door: $1,500-$3,000 installed. Holds up well but dents and rusts in salt air if the paint gets scratched.
  • Fiberglass entry door: $2,000-$3,800 installed. We recommend fiberglass for most Stuart homes east of US-1: no rust, no rot, good insulation, and it looks like wood if you buy a quality grain.
  • Impact-rated entry door (steel or fiberglass, with reinforcing): $2,800-$5,500 installed. Required for openings that aren’t protected by shutters or another approved covering.
  • Custom wood entry door: $4,000-$12,000+ installed. Beautiful, and a liability in Stuart’s humidity unless you commit to annual maintenance.

Sliding Patio Doors

  • Standard 6-foot vinyl or aluminum slider: $1,800-$3,200 installed.
  • Impact-rated 6-foot slider: $3,200-$5,800 installed. The bigger the glass, the bigger the impact premium.
  • 8-foot or 3-panel slider: $3,000-$7,500, depending on impact rating and panel width.

French Doors

  • Standard hinged pair (non-impact): $2,800-$5,000 installed.
  • Impact-rated hinged pair: $4,500-$8,000 installed. Hinged doors with impact glazing carry heavier hinges and reinforced stiles, which is where the cost comes from.

A binding door is often a hinge or jamb problem, not a door slab problem. Before you replace a $3,000 entry door, have someone check the reveal, the threshold, and the hinge screws. We have fixed more than a few Stuart doors for under $300 that another company told the homeowner to replace outright. That’s the difference between a repair mindset and a sales quota.

Energy Efficiency and the Numbers Behind Your Power Bill

A Stuart house with original single-pane windows spends anywhere from 15-30% more on cooling than the same house with modern Low-E insulated units. That’s a real number from our own customers’ FPL bills, not a brochure statistic. The physics is simple: single-pane glass is a transparent wall of heat, and our air conditioners fight the sun for eight months of the year.

The relevant measures on a window’s label:

  • U-Factor: how well the window resists heat flow. Lower is better. For Stuart, look for 0.30 or below on any non-impact unit. Impact glass runs slightly higher because the laminate adds mass.
  • Solar Heat Gain Coefficient (SHGC): how much solar radiation the glass admits. Lower is better for our climate. Look for 0.25 or below on south-facing and west-facing openings.
  • Visible Transmittance (VT): how much daylight passes through. Don’t go too dark chasing SHGC, or you’ll be turning lights on in the afternoon.
  • Air Leakage (AL): measure of frame and seal tightness. Look for 0.30 or lower.

The economic case: a 2,000-square-foot Stuart home with twelve original single-pane windows might spend $1,800-$2,400 a year on cooling in the summer months. Replacing those windows with Low-E insulated units typically cuts that by $350-$600 per year, and the improved comfort is the benefit you feel immediately, not the savings. The return is faster when the old windows leak air, which most 30-year-old aluminum frames do, because they were never built tight to begin with.

If you are not ready to replace, the retrofit route is film or solar screens. The film route helps, but window replacement is where the measurable performance lives.

Vinyl vs. Aluminum vs. Wood: A Side-by-Side Comparison

Every manufacturer talks about their own material like it’s the only one that works. The honest version, from a glazier’s seat, looks like this:

Vinyl

Price: $620-$1,300 installed per window, non-impact. Pros: good insulator, no rust, no rot, low maintenance, works well in Stuart’s humidity. Cons: expands and contracts in heat (we see more seal failures on cheap vinyl than any other material), limited on very large openings, and the budget lines look and feel budget. We prefer mid-grade vinyl from the national lines, not the off-brand white-label units sold by day-labor crews.

Aluminum

Price: $680-$1,850 installed per window, non-impact; higher for impact. Pros: strong enough for the biggest impact-rated openings, narrow sightlines, no expansion issues, and it’s the workhorse for Stuart’s coastal homes. Cons: it conducts heat, so it needs a thermal break to meet modern energy codes, and the cheaper extrusions will feel flimsy. Good aluminum is expensive; cheap aluminum is what corrodes into white powder on older riverfront homes.

Wood and Wood-Clad

Price: $1,100-$2,800 installed per window, non-impact. Pros: the look is unmatched, and a custom wood window is the right call on a historic home in Stuart’s Old Town. Cons: it rots, it swells, it needs paint or sealant every few years, and the salt air will find every exposed edge. We install wood-clad units when the architecture demands it and the homeowner commits to maintenance. Otherwise we steer them to fiberglass-clad or aluminum-clad composites.

Fiberglass and Composite

Price: $800-$1,900 installed per window, non-impact. Pros: dimensional stability in heat, low maintenance, good insulation, and it holds paint better than vinyl. Cons: fewer manufacturer lines to choose from, and the local supply chain runs slower. For a mid-range Stuart home, fiberglass is the material we would spec on our own mothers’ houses.

Our shop is an authorized installer for more than a dozen manufacturer lines, including, and PGT. We quote the lines side by side on paper so the homeowner sees exactly what changes when the frame material changes. We do that because a window is a thirty-year decision, and the right answer for a Willoughby Cove condo is different from the right answer for a Rio rancher.

The Installation Process, Step by Step

Here is how a window replacement should go, from first measure to final walk-through. If a contractor skips a step, you should know.

  1. Measure twice, and list the conditions. We measure every opening twice before quoting: width, height, square (diagonal), and the condition of the surrounding framing. The quote includes any rot repairs, stucco patching, or trim replacement called out up front, not as a surprise line item later.
  2. Quote with the manufacturer’s line and the product number. A square deal means you can look up the exact window we proposed. If a quote just says “vinyl window,” the contractor is leaving themselves room to substitute something cheap. Insist on the manufacturer and series name.
  3. Pull the permit. A window replacement in Stuart requires a permit when the opening is changed or when impact-rated products are being installed. We pull permits on every job that requires one and schedule the inspections. If the contractor suggests skipping the permit to “save money,” remember who they think they’re saving.
  4. Set the window in the opening, plumb and square. The frame is shimmed level and the reveal is checked on all four sides. This is where “if the pane is not true, the job is not done” applies literally. A window that’s set out of square will bind, leak, and eventually crack the glass.
  5. Flash and seal per the product approval. This is the invisible step with visible consequences. Flashing tape, sealant, and the correct anchoring pattern keep Stuart’s afternoon thunderstorms out. Impact windows have a specific anchoring schedule in their NOA; we follow it exactly.
  6. Install trim and seal the exterior. Interior and exterior trim gets replaced or reset, and the exterior perimeter is sealed with a quality polyurethane sealant. No cheap caulk, no gaps.
  7. Check operation and clean up. Every sash is opened, locked, and unlatched. Hardware is adjusted. Glass is cleaned. The work area is swept and the old windows are hauled away.
  8. Register the warranty in your name. Both manufacturer warranty layers get registered in writing before the truck leaves the driveway. This is the Keystone Standard at TruePane Windows & Doors, and it’s the reason you don’t get a “sorry, that was only a one-year floor sample warranty” call when something goes wrong in year seven.

The Warranty Truth Most Homeowners Miss

Every window sold in Stuart carries a warranty pitch. The hard truth is that most warranties are stacked, and most homeowners never get the second layer because the installer never registered it. A window has what the glass manufacturer covers (typically 10-20 years on the sealed unit) and what the frame manufacturer covers (often a lifetime limited warranty). If the installer never registers the product, or registers it under their own name, the warranty dies when the phone gets disconnected.

That’s why the TruePane Windows & Doors home page and every one of our job folders says the same thing: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. It’s not a marketing line. It’s the Keystone Standard, and it exists because Dale Kessler, who founded this company in 2008 after growing up in his father’s glazing shop, got tired of watching Stuart homeowners argue warranty claims on windows that were never properly registered in the first place.

We also stand behind the workmanship itself. The Done Right Promise covers the labor for 90 days, and if something isn’t done right, we make it right. No paperwork, no arguing, no fine print that covers neither. In a market where the contractor’s truck is often from another county, that matters. We plan to be in Stuart in thirty years, sponsoring the same county fairs and church roof funds we have always supported, and a warranty is only as good as the company that will still answer the phone when you call.

Common Mistakes to Avoid

  • Buying a window quote without a product number. If the quote doesn’t name the manufacturer and series, the installer can deliver whatever was on sale at the supply house. Insist on the exact product, and check what was delivered against the quote before the install starts.
  • Ignoring the permit line item. In Stuart, an unpermitted impact window installation is an insurance claim waiting to be denied. If the quote doesn’t mention permits, ask why.
  • Choosing a contractor on price alone. A window installed badly costs more than a good window in the long run. The cheapest bid in Stuart often comes from a crew that isn’t pulling permits, isn’t carrying worker’s comp, and won’t be in business when the first seal fails.
  • Assuming all “impact” windows are equal. There is a world of difference between a Miami-Dade NOA-rated product from PGT or CGI and an off-brand “hurricane” window with a one-page test report. Ask for the product approval number and check it against the Florida Building Code database.
  • Putting off replacement because the windows still “work.” A fogged double-pane window is a failed seal, not a working window. The insulating gas is gone, the glass is doing almost nothing for your power bill, and the failure only gets worse with Stuart’s heat cycles.
  • Forgetting the insurance credit. Impact windows change your wind premium. Call your agent before you finalize the package, and run the numbers. We’ve seen the savings pay for a meaningful share of the upgrade in Martin County.
  • Replacing a door when only the hardware or threshold failed. A binding door or a sticky slider is frequently a hinge, a roller kit, or a threshold repair, not a full replacement. A reputable shop will check the cheap fixes first and tell you if the door slab is actually shot.

When to Call a Professional

Any window or door opening that’s being changed in size is a job for a professional, no exceptions, because it involves structural framing, permit drawings, and a re-inspection. The same goes for impact-rated installations: the anchoring pattern has to match the product approval exactly, or the entire NOA is void, and no insurance adjuster will cover a voided NOA. If you see water stains on the drywall below a window, rotted wood in the sill, or condensation between the panes, that’s beyond a caulk-and-paint fix. And any high-tension work, like a heavy sliding door with a failed roller that’s being forced open against the track, can genuinely injure you. Stuart’s humidity and salt air accelerate frame failure, so when the frame goes, the fix is a replacement, not a patch. TruePane Windows & Doors offers free estimates in Stuart, call (754) 324-4646 and we’ll measure, quote, and walk you through what’s worth doing now and what can wait.

Frequently Asked Questions

The Bottom Line

Window and door replacement in Stuart is a five-figure decision most homeowners face exactly once or twice in their lives, and the way you buy changes what the job looks like in year ten. Get a quote that names the product, pull the permit, confirm the warranty registration, and don’t let the lowest bid talk you out of impact-rated glass in a wind-borne debris zone. The materials matter, but the installation matters more, and the installer who stands behind both is the one who’ll still be here when it counts. We’re TruePane Windows & Doors, we’ve been in Stuart since 2008, and if you want a square deal on windows and doors that are done right, call (754) 324-4646 for a free estimate.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stuart since 2008.

Why Impact

Six Reasons Homeowners Choose TruePane Windows & Doors

Hurricane Protection

Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Insurance Savings

Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other TruePane Windows & Doors Services

Reviews

What Neighbors Say About TruePane Windows & Doors

★★★★★

"Eleven windows replaced in two days. The crew chief, Marcus, showed me the level on every single frame before they caulked it. My wife noticed the street noise was gone before I did."

RRonald P.
★★★★★

"French doors to the patio, custom size because this house was built in 1961 and nothing is standard. Measured twice, three weeks to fabricate like they warned, and the install day they laid runners over my floors without being asked."

MMarie S.
★★★★★

"Impact windows on the whole house. They handled the permit, the inspection, and gave me a folder with every approval number for the insurance company. My windstorm premium dropped enough to notice."

BBill T.
★★★★★

"Our bay window had rotted at the sill and two other outfits wanted to talk us into a flat picture window instead. TruePane rebuilt the opening and matched the original look. Neighbors have knocked on the door about it."

GGene A.
★★★★★

"Whole-house window replacement at 71 years old is not something you want to do twice. Dale walked the house himself for the quote. Crew was the same three men all four days, and the foreman knew every window by room."

PPat and Ray L.
★★★★★

"A casement crank had stripped and the sash was swollen shut. The technician, Ray, fixed the crank on the spot and only then talked about replacement for the three windows that were genuinely done. That is why the whole street uses them now."

EEleanor G.
Need Windows & Doors help in Stuart? Licensed & insured · free written estimates
Call (754) 324-4646
Local Service Coverage

Request a Free Estimate in Stuart

Tell us what you need - TruePane Windows & Doors responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch