Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Stuart: What to Know First
CGI sliding glass and patio doors in Stuart are heavy, tightly engineered impact assemblies, and when they start to bind, leak, or refuse to latch, the fix usually comes down to rollers, a worn track, or a frame that has settled out of square. TruePane Windows & Doors provides independent CGI sliding glass & patio door repair, hardware replacement, and glass service throughout Stuart, with most jobs completed in a single visit. Pricing runs from about $225 for a roller and track service up to $2,800 or more for a full glass pack replacement, and every job is quoted on paper before work begins. This page is written for the homeowner who owns a CGI door, lives in Stuart, and wants to know exactly what they are up against before anyone puts a tool to it. Call (754) 324-4646 and a live person answers, day or night.
How CGI Products Fail - and How We Fix Them
CGI builds its doors to take a direct hit from a hurricane, and the frames are stiffer than most anything else on the market in Stuart. But stiffness has a cost. These doors are heavy, often 200 pounds or more per panel, and everything that carries that weight wears on a schedule. Here is what we actually see when a homeowner in Stuart calls us about a CGI sliding glass or patio door.
- Rollers flatten on the Sentry and Estate lines. The Sentry sliding door and the Estate series both ride on tandem steel rollers that were designed for weight, not for the fine sand that works its way into tracks in Stuart. When those rollers flatten or get scored, the panel drops a fraction of an inch and starts dragging at one end. We fix it by pulling the panel, replacing the rollers with the correct OEM or matched aftermarket set, and re-aligning the track. Skipping this lets a dropped panel chew up the threshold, and that’s a far more expensive problem.
- Interlocking stiles bind in the wet season. CGI sliding doors use a deep interlock between panels, which is part of why they carry the ratings they do. But Stuart’s humidity runs high from May through October, and frames on south-facing walls can move enough that the interlock grabs. The fix is not grinding down the interlock, which some handymen will do and which ruins the door’s water resistance. We adjust the panel height and square the frame so the interlock closes clean without losing its seal.
- Locking hardware loses its throw against worn keepers. On CGI’s older sliding doors, the mortise-style lock and the keepers in the jamb wear against each other until the latch no longer engages fully. The result is a door that feels locked but can be lifted or jiggled open. We replace the keeper and, where the lock body itself is worn, install a matched replacement rather than trying to shim an old one back into service.
- Threshold weep holes clog and water finds the track. CGI thresholds are engineered to drain, but Stuart’s oak pollen, sand, and the occasional millipede will plug the weep holes and hold water right where the rollers sit. The visible symptom is a door that gets harder to move after every rain. We clean and open the weep system, check the threshold slope, and replace any weatherstripping that has gone stiff from sitting in brackish air.
- Glass packs fog when the seal goes in salt air. The insulated glass in a CGI door is built for impact, but the seal around the edge of the unit is still a seal, and thirty years of Stuart’s salt air close to the river will eventually find its way in. The door stays safe, but you are looking through a fog. We measure and order a replacement glass pack, spec the correct CGI glass makeup, and reset it so the new seal is not fighting the frame from day one.
Our CGI Sliding Glass & Patio Doors Process
When we come out for a CGI door in Stuart, here is how the job runs. This is not a rush job, and nobody is selling you a door you do not need.
- 1
The call. You reach a person, not a recording. We ask what the door is doing, when it started, and which side of the house it faces. That tells us a lot before we even look.
- 2
On-site inspection. A background-checked, uniformed technician measures the opening, runs the panel, checks the track and rollers, and reads the frame for square. If the opening is not right, we say so.
- 3
Written quote. We put the options on paper, side by side. OEM CGI parts where it matters, quality aftermarket where it does the same job for less, and we tell you which is which and why. No surprise line items on the bill.
- 4
The repair. We pull the panel, replace what is worn, set the frame true, and clean the track as we go. We work in the home the way we would work in our own mother’s house.
- 5
Test and register. Before we leave, we cycle the door at least a dozen times, check the interlock, check the latch throw, and run water across the threshold if there is any question of drainage. Both warranty layers that apply to the door are registered in writing, with durations stated.
- 6
The Done Right Promise. If something is not right within 90 days, we come back and make it right. No paperwork fight, no fine print that covers neither.
What CGI Sliding Glass & Patio Doors Costs in Stuart
CGI work in Stuart is not cheap, but it should always be predictable. Here is what we quote most often for CGI sliding glass and patio doors in this market.
- Roller and track service: $225 to $450 per panel, depending on the series and whether the track needs re-setting.
- Interlock or weatherstripping repair: $180 to $400. This almost always involves panel re-alignment, not just a strip of vinyl.
- Locking hardware and keeper replacement: $160 to $350, parts included.
- Full glass pack replacement (fogged or damaged unit): $1,800 to $2,800 per panel, depending on size and glass makeup.
What moves the price is the panel size, whether the frame has been damaged by a dropped panel, and whether you choose OEM CGI glass or a matched aftermarket unit. We show both on the quote so you know exactly what you are buying. Call (754) 324-4646 for a free estimate, and we will put the numbers in writing before you decide anything.
Why Stuart Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler grew up in Rio, just south of Stuart along the St. Lucie River, and spent the better part of two decades setting and sealing windows and doors up and down the Treasure Coast before he opened TruePane in 2008. We have been serving Stuart since 2008 as a company, and we plan to be here another thirty. We are an authorized installer for more than a dozen manufacturers, including PGT, CWS, ES Windows, and ECO Window Systems, and we do more CGI service work than most shops because we quote it honestly. A live person answers the phone at (754) 324-4646 around the clock, and every job is covered by the Done Right Promise. If the pane is not true, the job is not done.
FAQs
No. TruePane is an independent CGI service provider in Stuart, not an authorized CGI dealer or warranty agent. We do not imply authority we do not have. What we provide is experienced, honest service on CGI doors, with OEM parts where they matter and clarity about what is covered by CGI’s own warranty. Call (754) 324-4646 and we will tell you exactly where your door stands.
It will not, as long as the work is done correctly and the parts used are appropriate to the door. The bigger risk is a cheap repair that leaves the panel out of square or the interlock ground down, which can cause exactly the kind of damage CGI will not cover. We document every job, photograph the before and after, and register any warranty layers that apply in writing. That matters when something goes wrong later.
Most roller, track, lock, and weatherstripping work on a CGI sliding glass or patio door in Stuart is completed in a single visit, usually within two to three hours. A full glass pack replacement takes longer because we measure, order the correct unit, and return to set it. We will tell you the timeline on the phone, and we will be there when we say.
That depends on the frame. If the frame is sound and square, repair is almost always the better money. If the frame has been racked by settling, or the threshold is chewed up from a dropped panel, replacement starts to make sense, and we will quote both options on paper so you can see the math. We do not upsell a homeowner on glass or hardware they do not need.
Yes. Along with CGI, we work on PGT, CWS, ES Windows, and ECO Window Systems sliding glass and patio doors throughout Stuart and Martin County. That matters because if you have a mix of brands in the house, one call to (754) 324-4646 covers all of them, and we quote each one honestly.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Stuart and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.