ES Windows Roof Repair Nationwide | TruePane Windows & Doors

ES Windows Roof Repair in Stuart: What to Know First

ES Windows roof repair in Stuart typically runs between $350 and $1,200 depending on whether we’re re-sealing a skylight curb, replacing a cracked glass unit, or rebuilding a rotted curb on a coastal home. Most repairs are completed in a single visit, and we carry both OEM and quality aftermarket gaskets and sealants so the job doesn’t stall waiting on parts. We’re an independent ES Windows service provider, not a factory-authorized dealer, which means we fix what’s actually wrong rather than what a warranty department wants to hear.

Call (754) 324-4646

This page is for Stuart homeowners who have ES Windows skylights, roof windows, or sloped glazing and need straight answers about repair costs, failure causes, and turnaround. Call (754) 324-4646 and you’ll talk to a live person who can schedule a site visit.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid product, but every manufacturer has weak points. Around Stuart, the salt air and summer humidity find them faster than they would inland. Here’s what we see on service calls, and what we do about it:

• ES Windows Series 700 curb-mount skylights and the rotted curb. The glass unit itself rarely fails first. What fails is the wood curb the installer framed underneath it. In Rio, Sewall’s Point, and Rocky Point, we regularly open up an ES skylight and find the curb has been soaking up moisture for years because the original installer flashed it with roofing felt instead of a proper self-adhered membrane. We pull the skylight, rebuild the curb with pressure-treated lumber and stainless fasteners, flash it with Grace Vycor or similar, then reset and re-seal the unit. Half the skylight repairs we do are really curb repairs hiding behind a leaking ES window.
• ES Windows Series 500 fixed roof windows with sealant-channel separation. These use an aluminum frame with a recessed glazing channel. After five to eight years in direct Florida sun, the butyl sealant inside that channel loses adhesion along the top edge first, where heat concentrates. You’ll see condensation between the panes that comes and goes with the weather. That’s not a glass failure; it’s a sealant gap. We disassemble the frame, clean the channel, and re-bed the unit in a commercial-grade silicone that holds up in coastal conditions. It’s a one-day job that costs a fraction of a new window.
• ES Windows operable venting skylights with corroded hinge points. Salt air eats the zinc-plated hinge pins on older venting units. The skylight still opens, but it sits crooked, and water tracks in along the low corner during the afternoon thunderstorms we get every summer. We replace the hinges with 316 stainless, reset the sash alignment, and re-seal the curb joint. If the unit is more than fifteen years old, we’ll tell you honestly whether new hinges are worth it or whether you should put that money toward a replacement with a current glass package.
• ES Windows insulated glass units with failed argon seals. This is the fogged-unit problem, and it happens on every brand eventually. What’s specific to ES is that the original warranty documents often cover the glass unit but not the labor to swap it, and the factory wants photographs, serial numbers, and a dealer to process the claim. As an independent service provider, we can’t file your warranty claim for you, but we can give you a written quote for the replacement unit and the labor, and we’ll hand you the documentation you need to pursue reimbursement yourself. Aftermarket glass from a local fabricator usually matches the original spec and cuts the wait time from weeks to days.
• ES Windows Series 900 sloped glazing with weep-hole blockage. Flat and low-slope glass collects debris: pine needles from the Australian pines along the river, seed pods, dirt. ES frames have weep holes along the bottom rail to drain water that gets past the outer gasket. When those weep holes clog, water backs up, finds the inner seal, and shows up as a drip on the inside corner. We clear the weep channels, replace the inner gasket, and sometimes drill additional weeps on the leeward side if the original spacing wasn’t adequate for a Stuart storm. Then we tell you to clear them with a pipe cleaner twice a year.

Our ES Windows Roof Repair Process

We follow the same sequence on every ES Windows roof repair, whether it’s a flat residential roof in North River Shores or a metal roof in Port Salerno. It keeps the work clean, the price honest, and the repair warranty-backed.

1. 1
   The call. A live person answers at (754) 324-4646, asks what you’re seeing, and sets an appointment. No forms, no callbacks.
2. 2
   The site visit. We inspect the ES unit, the surrounding roof surface, the curb, and the flashing. We take photos and measurements. If the roof is steep or the pitch is unsafe to walk, we bring a ladder standoff and work from a harness, not a prayer.
3. 3
   The parts decision. We tell you what the ES unit needs, whether OEM components matter for your situation, and where a quality aftermarket part saves real money with no downside. You approve the number before we touch a tool.
4. 4
   The repair. We do the work in one visit: re-seal the glazing channel, rebuild the curb, swap the hardware, replace the glass unit, whatever the diagnosis called for. We tarp and protect the interior if we’re pulling glass overhead.
5. 5
   The water test. After the repair, we run water over the unit from a controlled hose at roof level. If it drips, it’s not done. If it holds, it’s done right.
6. 6
   The paperwork. We leave you a written description of the work, the materials used, and the Done Right Promise in writing. If it fails inside of 90 days, we come back and fix it. No arguing, no fine print.

What ES Windows Roof Repair Costs in Stuart

Here are the numbers we quote most often on ES Windows roof work in Martin County:

• Re-seal a curb-mount ES skylight: $350-$550
• Replace a fogged ES insulated glass unit (fixed roof window): $500-$900
• Rebuild a rotted skylight curb and reset the ES unit: $700-$1,200
• Replace corroded hinges and re-align a venting ES skylight: $400-$650
• Full sloped-glazing seal replacement on an ES Series 900: $900-$1,800

What moves the price is access, glass size, and curb condition. A one-story roof with a walkable pitch is the cheapest scenario. A two-story roof in a tight zero-lot-line yard adds ladder work and safety time. Every quote is written, line-itemed, and fixed before we start. Call (754) 324-4646 to schedule a free estimate.

Why Stuart Homeowners Call TruePane Windows & Doors for ES Windows Work

We’ve been doing this long enough that Dale Kessler, our owner, can look at an ES skylight from the driveway and tell you roughly when it was installed and what the installer got wrong. He grew up in Rio, learned glass from his father, and spent two decades setting and sealing windows up and down the Treasure Coast before opening TruePane. That depth of experience is why we’re the call when an ES product has been leaking for years and two other companies have already been out.

Every repair carries the Done Right Promise: if it’s not right, we make it right, in writing, no paperwork fights. We send background-checked, uniformed technicians. We answer the phone with a live person at every hour. And we work on the full range of Florida brands - PGT, CGI, CWS, ECO Window Systems - so if your ES unit is beyond saving and you need a replacement path, we can quote you side-by-side options on paper and let you decide. We stand behind the work. That’s the whole point.

FAQs