Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Shingle, Tile & Metal Roofing in Stuart: What to Know First
We provide independent ES Windows shingle, tile, and metal roofing service in Stuart, with most repairs completed in a single visit and honest pricing quoted upfront before any work begins. If you own an ES Windows product and your roof is showing signs of wear around the openings where those windows meet the roofline, we can diagnose it, source the right materials, and fix it without the runaround. Call (754) 324-4646 and a live person answers, day or night.
This page is for Stuart homeowners who have ES Windows installed and need roofing work done around them, whether it is asphalt shingles, barrel tile, or standing seam metal. We are TruePane Windows & Doors, an independent ES Windows service provider based in the Treasure Coast. Dale Kessler has been setting and sealing windows in Martin County long enough to know that a roof leak and a window leak are often the same problem wearing two different hats.
How ES Windows Products Fail, and How We Fix Them
ES Windows makes a well-engineered product, but no window survives a bad flashing detail or a roofing crew that treats the rough opening like an afterthought. Here are the failure modes we see on Stuart homes and what we actually do about them.
- Flashing separation at the head of the window. On ES Windows 8700 Series and 6700 Series units, the top flange relies on a straight, clean mounting surface. When a roofer tucks shingle underlayment or peels back metal trim incorrectly, the head flashing lifts away over time. Stuart’s afternoon thunderstorms drive water sideways, and that lifted flashing becomes a funnel. We pull the affected shingles or tiles, reset the flashing with proper lap sequence, and reseal with a urethane that holds in our humidity.
- Warped sill track from reflected heat. Tile roofs in Stuart, particularly light-colored barrel tile, reflect heat back toward the window sill. On ES Windows aluminum-clad lines, repeated thermal cycling can bow the sill track enough to compromise drainage. We see this most often on south-facing walls in Sewall’s Point and Rocky Point. The fix is a sill replacement with the correct OEM profile, not a shim job that hides the problem for a season.
- Missed weep hole drainage after roof replacement. ES Windows products drain through weep holes at the sill. When a roofing crew re-flashes a window and seals the bottom edge too aggressively, the weep holes get plugged with mastic or butyl tape. Water backs up inside the frame and shows up later as staining on interior drywall. We clear the weep system, verify drainage with a measured water test, and document the repair so you know what was done.
- Caulking failure at the jambs. The side jambs on ES Windows Series 5500 and 8700 units are sealed with a factory-applied joint design that does not tolerate third-party caulk over-application. When a roofer runs a bead of cheap silicone up the jamb during a shingle or metal roof install, the original seal breaks down faster. We remove the failed material, clean the joint back to the original surface, and apply the correct sealant in the correct joint depth.
- Improper shingle-to-frame clearance. Shingle roofs need a specific gap between the window frame and the shingle edge to keep water from wicking. On ES Windows with wide bottom flanges, a roof laid too close splashes water against the frame. We reset the shingle course to the proper clearance and add a kick-out flashing where the roofline meets the wall above the window. This is a detail most crews miss, and it is why we look at the whole opening, not just the glass.
Our ES Windows Shingle, Tile & Metal Roofing Process
We treat every ES Windows roofing interaction as a water-proofing job first and a window or roof repair second. Here is how a typical call unfolds.
- 1
You call (754) 324-4646. A live person answers, asks where you are in Stuart, and schedules the diagnostic visit. No phone tree.
- 2
We measure and inspect. Before touching anything, we measure the rough opening, check the flashing condition, test the weep drainage, and identify exactly which ES Windows line you have. Most diagnostics start with the question: where did the water tell us it is coming from, not where we assume it is.
- 3
We put options on paper, side by side. If a part is needed, we quote the OEM ES Windows part and a quality aftermarket equivalent if one is appropriate. You see the difference in price, lead time, and warranty coverage before you spend a dollar.
- 4
We do the repair. That might mean pulling shingles, resetting flashing, replacing a sill track, or re-sealing jambs. Our techs are background-checked, uniformed, and trained to leave the opening better than they found it.
- 5
We test before we leave. Water test at the weep holes, visual check under the flashing, and a walkthrough of what was done.
- 6
We stand behind it. The Done Right Promise covers the workmanship. If it is not done right, we make it right. No arguing, no paperwork battles.
What ES Windows Shingle, Tile & Metal Roofing Costs in Stuart
An honest number helps you decide fast. Here are typical ranges we see for ES Windows roofing work in Stuart.
- Flashing reset and reseal around one ES Windows unit: $175 to $425 per opening, depending on roof type and access.
- Sill track replacement on an ES Windows 8700 or 6700 Series unit: $240 to $580 per window, including the part.
- Weep hole clearing and drainage restoration: $95 to $250 per window.
- Full jamb re-seal on tile roof openings: $300 to $700 per opening, based on scaffold or ladder access and the number of sides affected.
- Shingle reset with kick-out flashing correction: $200 to $475 per window.
What moves the price is roof pitch, single-story versus two-story access, and whether we find frame rot hidden under the flashing, which does happen on older Stuart homes near the St. Lucie River. Call (754) 324-4646 for a free estimate. We give the number in writing before we start, and the number does not change once work begins unless you ask for additional scope.
Why Stuart Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been doing this work in Stuart since 2008 through a heritage that goes back to Dale Kessler’s father, who spent thirty years as a glazier before handing Dale his first glass cutter at fourteen. That is not a marketing line. It is why our techs measure every opening twice and why we register manufacturer warranty layers in writing before the truck leaves your driveway, a standard we call The Keystone Standard.
We are not the cheapest bid. We are the last call you should need to make. Every job carries the Done Right Promise, and we put it in writing. If the pane is not true, the job is not done. That rule has governed TruePane since Dale opened the doors in 2008, and it applies as much to a roof flashing around an ES Windows product as it does to the glass itself.
We also service PGT, CGI, CWS, and ECO Window Systems, so if your Stuart home has a mix of brands across different openings, one crew can handle it all without pointing fingers at another trade.
FAQs
Yes, when the work is done as an independent ES Windows service provider using the correct OEM or approved-alternative parts and sealants, the original window warranty remains intact. We do not modify the frame structure or glass, which is what typically triggers a voided claim. If you are under warranty, we can help you document the repair properly. Call (754) 324-4646 and we will walk you through what your specific ES Windows line requires.
Most ES Windows sill tracks and flashing components can be sourced within three to seven business days through our supplier network. Common sealants and drainage components we keep on hand in the truck. If you are dealing with an active leak, we can often do a temporary water-stop on the first visit while the correct part is ordered, and we will not leave the opening unprotected. Call (754) 324-4646 for a same-week assessment.
If the frame is sound and the leak is at the flashing, jamb seal, or weep drainage, repair is usually the right call and costs a fraction of replacement. If the frame is rotted or the glass seal has failed from years of water intrusion, replacement may be the more honest long-term answer. We will quote both options side by side on paper and tell you straight which one we would choose if it were our home in Stuart. A free estimate comes with that conversation. Call (754) 324-4646.
Yes. We work with all three roof types common in Stuart, including barrel tile on older Martin County homes, standing seam metal on newer construction, and asphalt shingle everywhere else. Each roof type has its own flashing and clearance requirements around ES Windows openings, and we train our techs on the difference. What works on a shingle roof will leak on tile if the detail is not adjusted, and we correct that on the first visit.
No. When we quote a flashing, sealing, or sill repair, the price we give in writing is the price you pay. The only exception is if we open the wall and find rot or damage that was not visible during the diagnostic, and in that case we stop work, show you what we found, and quote the additional scope before proceeding. No surprise line items. No change orders hidden in fine print. Call (754) 324-4646 for a free estimate and we will put the number in front of you before we begin.
Contact Us
If you own ES Windows products in Stuart and your roof is leaking or the flashing looks wrong, call TruePane Windows & Doors at (754) 324-4646. We will ask a few questions, schedule a diagnostic visit, and give you a written estimate before any work begins. A live person answers 24 hours a day, 7 days a week. We have been serving Stuart and the Treasure Coast since 2008, and we will be here when you call.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Stuart and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.