French & Double Doors

French & Double Doors in Stuart, FL | TruePane Windows & Doors

French and double doors give a home in Stuart something sliding glass simply can’t: a wide, symmetrical opening that makes a patio, lanai, or back garden feel like part of the living space. But in Martin County, a door like this has to do more than look good. It has to hold up under hurricane-force wind, flying debris, and decades of salt air. We install impact-rated French and double doors from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass that meet Florida’s High-Velocity Hurricane Zone code, so you get the look you want without compromise. Call (754) 324-4646 to talk about your opening.

Call (754) 324-4646

Product Overview - French & Double Doors

Our impact French and double door systems are paired door configurations built for interior-to-exterior openings where both panels carry laminated impact glass in every lite. That’s the specification that matters most in Stuart: the glass isn’t a weak point waiting for a storm. The PVB interlayer holds the pane together even if it’s struck, which keeps the building envelope intact when pressure differentials are at their worst.

Architecturally, these doors fit where a homeowner wants symmetry. A true French door is two active panels that meet at the center, with no fixed post interrupting the view. A double door configuration can also mean one active panel and one that stays locked until needed, which suits wider openings or rooms where you only occasionally need the full span open. Both styles give you clean sightlines and a classic Florida look that suits everything from a 1970s ranch in North River Shores to a newer coastal build in Sewall’s Point.

The frames are extruded aluminum or reinforced vinyl, depending on the line. Aluminum carries the slimmest profiles and the most contemporary look. Vinyl delivers thermal performance and a softer, more traditional aesthetic. What unites them is engineering: multi-point locking hardware at the head and sill, along with the meeting stile, so when these doors are closed and locked, they function as a sealed structural unit, not a decorative afterthought. In our Stuart installs, we see these most often on rear elevations facing a patio or pool, but they also work beautifully as an interior-to-exterior transition on a covered porch or summer kitchen.

Technical Specifications

Here’s what you can expect from the impact French and double door systems we sell and install in Stuart. Every configuration is quoted to your exact opening, so use these values as planning parameters rather than a fixed menu.

• Frame materials: Aluminum (slim profile, contemporary) or vinyl (thermal efficiency, classic look)
• Maximum width: Up to 96″ wide across the paired opening
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish options: White, almond, bronze, black, tan
• Hardware: Multi-point locking at head, sill, and meeting stile
• Compliance: Miami-Dade NOA and Florida Product Approval available per configuration
• Design pressure: Matched to your Stuart wind zone, up to +/-100, never higher
• Codes: Engineered to Florida Building Code HVHZ requirements

Door configuration, swing direction, and panel width are selected at the time of measurement. We’ll walk you through what makes sense for your opening during the free on-site estimate.

Hurricane & Compliance Performance

Every product we sell in Stuart has to earn its place on a coastal Florida home. Here’s how these French and double doors are built and tested for that job.

Laminated Impact Glass - Every lite uses laminated glass with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack, but the interlayer holds the pane in the frame. That’s the difference between a door that takes a hit and stays sealed versus one that opens your home to wind-driven rain and pressure damage.

Miami-Dade NOA & Florida Product Approval - Impact-rated products need approval paperwork, and these lines carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers issued per configuration. We verify the correct approval on your specific quote before ordering. If you’re pulling a permit in Stuart or anywhere in Martin County, that documentation matters.

FBC / HVHZ Compliance - These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the stricter code tier applied to coastal South Florida and the Treasure Coast. Doors built to this standard are tested for the conditions we actually get here, not just inland wind loads.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under a specific protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. When you see “impact rated” on a TruePane quote, this is what it means. The door survived a 2×4 fired at speed, repeated wind-pressure cycling, and a forced-entry attempt, all in a lab.

Design Pressure for Your Wind Zone - Design pressures are matched to your wind zone, up to +/-100, never higher. A door on the coast in Stuart has a different requirement than one on the lee side of a community in Palm City. We order to your address, your opening, and your exposure, not to a stock number.

Energy Performance - Low-E and insulated glass options are available for these doors. If your opening faces morning or afternoon sun, a Low-E insulated pack helps manage solar gain and keeps the door from radiating heat into your living space. It’s worth considering on any Stuart home where the door gets direct eastern or western exposure.

Color & Glass Options

The finish you choose changes the whole personality of the door. White is the classic Florida choice and works with nearly every exterior palette. Almond and tan suit homes with warmer stucco tones, common throughout Martin County’s older neighborhoods and newer Mediterranean-style builds. Bronze and black are the modern statement finishes, and they read especially well on coastal contemporary homes in Stuart and Sewall’s Point where the door is framed by light walls or landscaping.

Glass selection is about what you want the door to do beyond storm protection. Clear laminated impact glass maximizes visibility and is the most economical way to meet code. Low-E insulated glass improves energy performance and cuts glare, which matters on west-facing patios where the afternoon Stuart sun is relentless. Tinted glass reduces brightness and adds privacy during the day, a popular choice for doors near the street line in Rocky Point or along the water where reflection is a concern.

Every glass option we offer carries the impact rating. You’re choosing performance and comfort layers on top of the hurricane requirement, not replacing it.

Installation by TruePane Windows & Doors in Stuart

The best engineered door in the world will leak if it’s installed out of square. That’s true anywhere, but it’s especially true when the product carries a Miami-Dade NOA. The approval is tied to how the door is set, fastened, and sealed in the opening. Improper installation voids the tested performance. This is why we treat installation as part of the product.

Our process begins with a pre-install inspection. We measure the actual opening, check the substrate, and look for any existing water damage or structural issues before we order anything. In Stuart, where older concrete block homes meet newer wood-frame construction, that step catches problems that would otherwise surface after the door is in.

On install day, we set the frame level, plumb, and square before anchoring. The perimeter is sealed with AAMA 812 low-expansion foam sealant, then flashed and sealed to shed water per AAMA 2400/2410 installation practice. Sill pans, threshold sealing, and interior air barriers all follow the approved practice for HVHZ jurisdictions. We finish with a water test on the full opening and a cleanup that leaves your home the way we found it.

We also know Stuart’s permitting landscape. Martin County requires product approval paperwork as part of a permit submittal on impact doors, and we supply the documents your configuration needs. If your HOA or building department asks for more, we’ll work with them. Call (754) 324-4646 to schedule an on-site measure and we’ll walk you through the entire process.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Stuart

If you’re considering impact French or double doors for your Stuart home, the next step is a free on-site measurement. We’ll take exact dimensions, walk you through the configurations that meet Martin County’s HVHZ permitting requirements, and give you a written line-item quote. Call (754) 324-4646 to start your project.

Written by the team at TruePane Windows & Doors, serving Stuart, FL and surrounding Martin County.