Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Port Salerno
Custom window and door work in Port Salerno is different from anywhere else in Martin County. The salt air off the Manatee Pocket takes a real toll on frames, hardware, and seals, and the older bungalows in the fishing-village core hide framing and waterproofing problems that only show up once a wall is open. TruePane Windows & Doors has been doing custom work here long enough to know what we’re going to find before we open the wall. If you’re planning a custom window or door project in Port Salerno, call (754) 324-4646 for a free estimate and we’ll walk the job with you first.
Why TruePane Windows & Doors Is Port Salerno’s Preferred Custom Windows & Doors Company
Port Salerno homeowners tend to keep their houses for decades. They remember the last contractor who cut corners. They pay attention to who shows up on time, who measures twice, and who puts the warranty in writing. Our Custom Windows & Doors team works that way because Dale Kessler built the company on it: if the pane is not true, the job is not done.
We’ve worked the blocks off Salerno Road, down near the commercial docks, and through the newer waterfront infill along the Manatee Pocket. We know which streets have the worst salt exposure and which 1960s CBS bungalows still carry original single-pane aluminum. That local knowledge means we quote the right materials the first time, not the cheapest ones. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway. A live person answers every call at (754) 324-4646, 24 hours a day.
Our Custom Windows & Doors Services in Port Salerno
We install, replace, and service custom windows and doors for Port Salerno homeowners, with a focus on the work this waterfront community actually needs: impact-rated glazing, custom shapes, and oversized glass panels that hold up to the salt air.
Custom Shape Windows
Port Salerno’s older bungalows and newer waterfront builds both call for windows that aren’t stock rectangles: arched tops, radius corners, angled transoms. We measure every opening twice, order from manufacturer lines like Marvin and Pella, and register both warranty layers before the truck leaves. A custom-shape window near the Manatee Pocket needs marine-grade framing hardware as much as it needs a precise cut.
Commercial Storefront Glazing
The working waterfront along the Manatee Pocket includes marinas, chandleries, and seafood houses with storefront glass that takes a beating from salt spray and storm winds. We replace and install commercial storefront glazing for Port Salerno businesses, spec’d with anodized or impact-rated frames that won’t oxidize out in three years like standard aluminum will within a half-mile of the water.
Curtain Wall Systems
For larger waterfront properties and newer dockside construction, curtain wall systems require careful engineering and code-compliant installation. We bring the same years of craft tradition to Port Salerno’s bigger glass jobs, pulling permits where required and documenting every flashing and seal detail before we close things up.
Architectural Grilles & SDLs
Some Port Salerno homeowners want the classic divided-light look without sacrificing impact rating. Simulated divided lites (SDLs) applied over impact-rated glass give you the aesthetic of older Florida architecture while meeting Martin County’s windborne-debris requirements. We install architectural grilles and SDLs on custom windows and doors throughout Port Salerno, including the waterfront blocks where the look has to survive the environment too.
Oversized Glass Panels
Fixed picture windows and sliding door panels that run floor to ceiling are common in Port Salerno’s newer dockside homes, where the view of the Manatee Pocket is the point. Oversized panels need exact framing, correct dead loads, and glass rated for the high-velocity hurricane zone we sit in. We handle the engineering, the permit, and the install as one job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port Salerno
We’re authorized installers for more than a dozen manufacturer lines, and the ones that matter most in Port Salerno are the ones built for coastal Florida conditions: CGI and PGT make impact-rated lines tested for exactly the wind and debris loads Martin County sees, and ES Windows and ECO Window Systems offer high-end custom and energy-efficient options that hold up to marine exposure. We quote manufacturer lines side by side on paper so you see exactly what you’re buying, and we register both warranty layers in writing before the truck leaves your driveway.
Common Custom Windows & Doors Problems We See in Port Salerno Homes
- Salt-air corrosion on standard aluminum frames. Within a half-mile of the Manatee Pocket, ordinary aluminum windows oxidize, pit, and lose seal integrity in as little as three to five years. We see sash separation and frame failure that inland customers never experience, which is why we spec marine-grade anodized or impact-rated vinyl and fiberglass on any water-adjacent job.
- Rotten or undersized framing behind original windows. Port Salerno’s 1950s through 1970s wood-frame and CBS bungalows frequently hide deteriorated headers, corroded jamb anchors, and failed flashing tape behind the old single-pane aluminum. You don’t know it’s there until the wall is open, and then code requires you to fix it.
- Non-compliant openings in pre-1990s homes. Most of Port Salerno’s original housing stock predates post-Hurricane Andrew impact standards. Any permitted alteration to an opening in Florida’s high-velocity hurricane zone triggers the requirement for impact-rated glazing or approved storm protection.
- Fogged or failed insulated glass units near the water. Seal failure shows up as condensation or haze between panes. In Port Salerno’s salt-heavy air, that failure arrives sooner, and once the seal is gone the glass’s insulating and impact performance is compromised.
Pricing for Custom Windows & Doors in Port Salerno, FL
Custom window and door work in Port Salerno runs on a real range, and we quote it on paper before any work starts. A single custom-shape impact-rated window replacement typically runs $1,400 to $3,800 depending on size, shape, and frame material. Oversized glass panels and sliding door replacements start around $2,800 and can reach $9,000 or more for multi-panel configurations with high-end frames. Architectural grilles and SDLs add $200 to $600 per opening depending on pattern and count. Marine-grade anodized or impact-rated vinyl and fiberglass frames cost 15 to 30 percent more than standard aluminum, but near the Manatee Pocket they’re not an upgrade; they’re the baseline. Call (754) 324-4646 for a free, written, line-item estimate. No surprises on the bill, and any hidden framing or wiring issue gets priced and approved before we touch it.
We Also Serve Cities Near Port Salerno
Beyond Port Salerno, our crews serve the surrounding Martin County communities: Stuart, Hobe Sound, Palm City, and Jensen Beach. If you’re just outside Port Salerno proper, call (754) 324-4646 and we’ll let you know our next available appointment in your area.
Serving Port Salerno, FL - Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Port Salerno
Port Salerno sits directly on the Manatee Pocket, and the constant onshore salt-laden air is the most aggressive marine micro-environment on the Treasure Coast. Standard aluminum frames within a half-mile of the water oxidize, pit, and seal-fail in as little as three to five years, while the same window inland might last fifteen or more. The only durable answer near the docks is marine-grade anodized or impact-rated vinyl and fiberglass frames. Call (754) 324-4646 for a free estimate and we’ll spec the right material for your distance from the water.
The most common hidden issues are failed flashing tape, corroded jamb anchors, rotten or undersized headers, and electrical wiring that hasn’t been touched since the original build. On a 1960s CBS bungalow off Salerno Road, our crew opened a wall to replace a single-pane aluminum double-hung and found all of the above. We wrote an allowance into the contract, pulled the permit-triggered electrical and framing upgrades, and installed an impact-rated Marvin casement with low-E glass and argon fill, then documented the new flashing tape and jamb seals before closing the wall. That’s how we handle every older Port Salerno home: inspection first, allowance written in, any surprise priced and approved in writing before we touch it.
Yes. Port Salerno sits inside Florida’s high-velocity hurricane zone, and Martin County enforces Florida Building Code impact requirements on any permitted opening alteration. That means impact-rated glazing or approved storm protection is legally required, not a suggestion. We install impact-rated lines from CGI, PGT, and Marvin, and we register both warranty layers before the truck leaves your driveway. Call (754) 324-4646 to discuss which impact ratings your specific openings need.
Fog between panes means the insulated glass unit’s seal has failed. Once that seal is gone, the argon or krypton fill leaks out, the glass loses much of its insulating value, and the unit’s impact rating is compromised. In Port Salerno’s salt-heavy air, seal failure arrives sooner than it would inland. The fix is replacing the insulated glass unit or the full sash, and we’ll quote both options in writing. Call (754) 324-4646 and we’ll send a tech to confirm the failure and price the repair.
Every contract includes a written allowance for the hidden framing, flashing, and electrical issues that commonly surface in Port Salerno’s pre-1990s bungalows. If we open a wall and find something beyond the allowance, we stop work, price the additional scope in writing, and get your approval before we touch it. There are no change orders you didn’t sign, and the Done Right Promise covers the finished work. Call (754) 324-4646 for a free estimate and we’ll walk you through exactly what the contract covers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port Salerno and the Treasure Coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.