Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Stuart
Door installation in Stuart means dealing with salt air, concrete block openings, and wind codes that most inland contractors never face. A standard door hung with zinc hardware two miles from the St. Lucie Inlet starts corroding within five years. We know because we see it on nearly every waterfront job we take apart. TruePane Windows & Doors installs entry doors, storm doors, French doors, and custom arched units built for this exact environment, and we schedule crews out to Stuart every week. Call (754) 324-4646 for a free estimate, and we’ll measure every opening twice before quoting anything.
Why TruePane Windows & Doors Is Stuart’s Preferred Door Installation Company
We have been pulling door frames out of Stuart homes long enough to know what hides behind them. Not every company that advertises in Martin County understands what a jalousie opening from 1962 looks like once the stucco comes off. We do. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the opening is not true, the job is not done. That rule matters more in Stuart than almost anywhere else on the Treasure Coast, because concrete block construction does not forgive sloppy framing.
Homeowners in neighborhoods like North River Shores, Snug Harbor, and Sewall’s Point call us because they want the job done right the first time. They have lived in their houses for twenty or thirty years. They remember the last contractor who hung a door that binds in July. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and every job carries our Done Right Promise. If it is not right, we make it right. No paperwork, no arguing.
Our Door Installation team works in uniform, background-checked, and trained as journeymen, not day laborers. A live person answers our phone 24 hours a day. That is not a call center. It is us.
Our Door Installation Services in Stuart
Entry & Swing Doors
Entry doors in Stuart take more abuse than doors almost anywhere in Florida. Salt aerosol, afternoon thunderstorms, and hurricane-season wind pressure all land on the same hinge line. We install fiberglass and steel entry doors with marine-grade stainless hinges and threshold screws sealed against electrolysis on every install. For homes within a mile of the river, that is not an upgrade, it is the only way the hardware survives. A typical entry door replacement in Stuart runs $1,800 to $4,200 installed, depending on impact rating and frame condition.
Storm Doors
Storm doors do double duty in Stuart: they protect the main entry door from direct salt exposure and give you cross-ventilation in the winter months when the humidity finally drops. The mistake we see most often is homeowners buying a storm door with standard zinc hardware. In North River Shores and along St. Lucie Boulevard, that hardware seizes within three or four seasons. We quote storm doors with stainless hardware from the start. Most run $450 to $950 installed.
Double & French Doors
French doors facing the water need more than impact glass. The active panel carries everything: wind load, salt, and daily use. We set double doors with reinforced sills, paired stainless hinges, and factory-registered impact glazing. Homes in Stuart’s 1950s and 1960s CBS neighborhoods often have sliding door openings where a French door fits better, and we frame those conversions properly rather than shimming the gap. Expect $3,200 to $7,500 depending on width, impact rating, and what the old opening looks like once it is exposed.
Pivot Doors
Pivot doors are common in newer, larger Stuart homes and in custom rebuilds along the river and lagoon. They are heavy, and they demand a subfloor and header that can carry the load. We do not hang a pivot door on a framing package that was not built for it. The Keystone Standard applies here just like every other install: both warranty layers registered, durations stated in writing, and the Done Right Promise behind the work. Pivot door installations in Stuart typically run $5,500 to $12,000 installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stuart
We are an authorized installer for PGT, CGI, Ply Gem, and CWS, among others, and we quote those lines side by side on paper so you can see exactly what the glass package, frame material, and hardware cost. That side-by-side quote matters in Stuart because PGT and CGI both build marine-grade hardware options, but not every model line includes them by default. We stock common replacement hardware locally so a hinge or threshold swap does not mean waiting on a distributor. Most repair parts for Stuart jobs are on the truck.
Common Door Installation Problems We See in Stuart Homes
- Rusted hinges and lock hardware on river-facing doors. Non-marine-grade steel corrodes within five to seven years this close to the St. Lucie Inlet, and the first sign is a door that binds or a deadbolt that will not throw. We replace with stainless hardware and seal the fasteners against electrolysis.
- Rotted jambs hidden behind original CBS openings. Older Stuart homes typically have no sill pan and no flashing tape, so wind-driven rain wicks into the slab and rots the jamb from the bottom up. We find this on most 1960s and 1970s openings we open up.
- Corroded aluminum threshold screws in salt-soaked concrete. Standard threshold screws set into salt-exposed concrete create electrolysis and frame corrosion within two seasons. We use sealed stainless fasteners on every exterior door in Stuart, waterfront or not.
- Out-of-square concrete block openings. CBS construction rarely settles evenly, and a 60-year-old opening is often a quarter inch out of square. Shimming the gap does not fix the bind. We reframe to true before hanging the door.
Pricing for Door Installation in Stuart, FL
Here is what we currently see in Stuart’s market. A basic entry door swap on a standard 36-inch opening runs $1,800 to $3,200 if the frame is sound. Impact-rated entry doors with stainless hardware run $2,800 to $4,500. Storm doors run $450 to $950. Double and French door replacements run $3,200 to $7,500, and pivot doors start around $5,500. Hidden framing, rot, and waterproofing corrections are priced and approved in writing before we make the first cut. You will get a written line-item quote at the free estimate, and that price does not move unless you approve a change order. Call (754) 324-4646 to schedule yours.
What We Find When We Open Up a Stuart Door
Stuart’s waterfront homes within a mile of the St. Lucie Inlet have one thing in common: standard-grade door hardware and weatherstripping corrode in under a decade. The constant salt aerosol gets into every hinge pin, every threshold screw, every weatherstrip channel. That means door replacements here require marine-grade stainless steel fasteners and hardware, not the standard zinc or brass used just ten miles inland in Palm City. We write that into every Stuart quote because skipping it guarantees a callback in five years.
On a 1960s CBS home along St. Lucie Boulevard in North River Shores, we pulled a jalousie side panel and found the original wood jamb completely rotted behind the stucco. No flashing tape, just bare concrete against the frame. We reframed the opening with pressure-treated lumber, installed a Pella impact-rated entry door with stainless steel hinges and a fusion-welded frame, and wrote the change order for the hidden rot on-site with the homeowner’s signature before making the cut. That is how we handle every surprise on a Stuart job: identify it, price it, get approval in writing, then do the work.
We Also Serve Cities Near Stuart
Our crews work throughout Martin County and the surrounding coast. In addition to Door Installation in Stuart, we install and service doors in Jensen Beach, Palm City, Port Salerno, and Hobe Sound. If you are just across the county line or along the lagoon, call us and we will schedule a free estimate.
Serving Stuart, FL - Our Local Coverage Area
We’re based in the Stuart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Stuart
Yes. All of Stuart falls within Florida’s Wind-Borne Debris Region, which means impact-rated glazing is a code requirement for any permitted replacement, not a coastal add-on. Martin County enforces this on every inspection, waterfront lot or not. Plan for impact-rated door glass on any permitted door replacement. Call (754) 324-4646 and we’ll quote the specific glass package your opening requires.
Because the builder used standard zinc or brass hardware, which cannot survive Stuart’s salt aerosol. Homes within a mile or two of the St. Lucie Inlet need marine-grade stainless steel hinges and fasteners, and most production builders do not spec them. We replace corroded hardware with stainless and seal every fastener against electrolysis. If your door is binding or the deadbolt will not throw, call us for a hardware inspection.
Sometimes the slab can be reused, but in a 1970s CBS opening we almost always find hidden rot or missing flashing once the trim is off. A slab-only swap on a failed frame just buys you another two or three years. We will assess the frame during the free estimate and tell you honestly whether the jamb is sound or needs to come out. The price for either path is on the written quote.
If your home or building sits in Stuart’s historic downtown core, Martin County requires preservation review before you replace an exterior door on an early-20th-century wood-frame structure. That review can limit materials and sightlines. We have walked Stuart homeowners through that process and we will tell you during the estimate whether your property triggers review, and how to prepare the application. Call (754) 324-4646 with the address and we’ll check.
Argon gas between the panes is what gives double-pane door glass its insulation value in Stuart’s heat. When the seal fails and the gas escapes, you lose thermal performance and often start seeing condensation or a cloudy film between the panes. That fog is the tell. Once the seal is gone, the glass cannot be regassed, it has to be replaced. We quote replacement glass packs for doors from PGT, CGI, and Ply Gem, and we handle the warranty registration for you. Call (754) 324-4646 for a glass assessment.
Call TruePane Windows & Doors for Door Installation in Stuart
If your Stuart home needs a new door, a hardware repair, or a full frame rebuild, call us at (754) 324-4646. We will schedule a free estimate, measure the opening properly, and put the full price in writing before any work starts. A live person answers the phone, 24 hours a day. We stand behind the work with the Done Right Promise and The Keystone Standard, because in Stuart, a door has to survive more than weather. It has to survive the salt.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stuart, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.