Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Jensen Beach
Window installation in Jensen Beach runs $650-$18,400 depending on whether you’re replacing a single jalousie with a basic single-hung or retrofitting a canal-front home with full impact-rated PGT or CGI units. Most standard replacements in Jensen Beach are done in a single visit, with permitted impact work taking 4-6 weeks from measure to final inspection because Martin County requires product approvals before the first screw goes in. We’ve worked Jensen Beach homes from the Hutchinson Island side to the mainland off NE Jensen Beach Boulevard, and we understand what salt air, two-direction winds, and Citizens Insurance demand from every opening. Call (754) 324-4646 to schedule a free measure with a crew that has done this work here for years.
Why TruePane Windows & Doors Is Jensen Beach’s Preferred Window Installation Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We carry that rule into every Jensen Beach home we touch, from 1970s concrete block ranchers off Savannah Road to newer stucco builds near Pineapple Park. Our Window Installation team measures every opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s why Jensen Beach homeowners who got burned before call us when they’re ready to do it right.
We’re not a franchise crew rotating through from somewhere else. Dispatch and scheduling run from our South Florida office, but the technicians working in Jensen Beach know this market, know Martin County’s wind-borne debris zone, and know what a Citizens four-point inspector looks for on Indian River Drive versus a set-back lot near the lagoon. Every technician is background-checked and uniformed, and a live person answers our phone 24 hours a day, seven days a week. No voicemail tree. No callback form. When a Jensen Beach homeowner calls, they get a person who can talk about their specific street.
Our Window Installation Services in Jensen Beach
Sliding Windows
Sliding windows are the workhorse of Jensen Beach’s canal-front and lagoon-facing homes, and also the style we see fail most often. Salt-laden air from both the Atlantic and the Indian River Lagoon corrodes aluminum tracks and multi-point hardware within 10-15 years, which means sashes start sticking or jamming just when you need them to open for the afternoon sea breeze. A typical impact-rated sliding window replacement in Jensen Beach runs $900-$5,200 per opening depending on size, frame material, and whether the opening needs sill repair or stucco work. We set new frames with butyl flashing and backer rod, then register the product approval paperwork so the four-point inspection clears without question.
Single & Double Hung Windows
Single and double hung windows are common in Jensen Beach’s 1960s-1980s concrete block and stucco housing stock, where original single-pane aluminum units still predate Florida’s wind-load code. A standard single-hung replacement with insulated glass in Jensen Beach starts around $650 per window, while impact-rated double hungs with low-E coating and argon fill typically land between $950 and $3,900 per opening. The difference matters for more than comfort. A home that still has original single-pane windows will not pass a Martin County permit inspection for replacement work unless the new units meet current wind-borne debris requirements or are protected by shutters.
Casement Windows
Casement windows seal tighter than sliders or hungs under the wind loading Jensen Beach gets during hurricane season, which is why we recommend them for east-facing walls that catch Atlantic gusts. Multi-point locking hardware gives a casement a structural edge over a double hung, and the crank operation avoids the track-corroding issues that plague sliders near the lagoon. Expect to pay $800-$4,600 per casement in Jensen Beach depending on size and impact rating. We quote Andersen, Pella, and PGT casement lines side by side so you see the difference in DP rating, U-factor, and warranty duration on paper, not in a sales pitch.
Fixed & Picture Windows
Fixed and picture windows carry the biggest glass loads in Jensen Beach living rooms facing the lagoon or the ocean. Because they don’t open, they’re rated entirely on frame strength, glass makeup, and anchoring, which means the product approval documentation matters even more when an inspector checks the home. A large fixed impact window in Jensen Beach typically runs $1,200-$7,000 installed, with the higher end reserved for oversized openings that need reinforced header work or custom CGI glass. We handle the permit paperwork and the structural fastening schedule so the installation holds up to both code enforcement and hurricane loading.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jensen Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Jensen Beach homeowners we lean on brands engineered for Florida’s wind load and salt exposure. CGI and PGT product approvals are common on Martin County permits because inspectors recognize the NOA numbers, and ES Windows offers mil-finish aluminum frames that hold up better than powder coat on lagoon-facing elevations. We also work with ECO Window Systems for homeowners who want a strong impact rating without the premium price of the big nationals. Every quote we write for Jensen Beach lists the manufacturer, the product line, the DP rating, and both warranty layers on paper, so you compare what actually matters.
Common Window Installation Problems We See in Jensen Beach Homes
- Fogged insulated glass in post-2004 impact windows. Frances and Jeanne drove a wave of impact installations that are now approaching 20 years old, and the IG seals in many of those units have failed. Fog between the panes means the argon is gone and the U-factor has climbed, which quietly pushes cooling bills up and gives a four-point inspector something to flag.
- Corroded aluminum frames on lagoon-side homes. The Indian River Lagoon sits west of Jensen Beach and the Atlantic sits a mile east, so even set-back properties get salt-laden air from two directions. Aluminum frames pit and multi-point locks seize in a decade or less, which is why we flash every jamb with butyl tape and recommend fusion-welded frames wherever possible.
- Original jalousie and single-pane sliders failing insurance checks. Jensen Beach’s 1960s-1980s housing stock still carries a lot of jalousie windows and single-pane aluminum sliders that predate wind-borne debris code. Many of these homes cannot pass a Citizens four-point inspection until the openings are upgraded to impact-rated or shutter-protected units.
- Permit and NOA paperwork missing from earlier installs. We see homes where windows were replaced years ago, but the product approval documentation was never left with the owner. When it comes time to sell or renew a policy, the homeowner has no way to prove the glass meets Martin County’s wind load requirement. Our installs always end with the NOA paperwork in your hand and registered warranty copies in the file.
Pricing for Window Installation in Jensen Beach, FL
Window installation pricing in Jensen Beach breaks down into a few predictable ranges. A basic vinyl single-hung replacement without impact rating starts around $650 per opening. Mid-range impact-rated sliders and double hungs run $900-$5,200 depending on frame material and size. Full-impact PGT or CGI casement or picture windows on large lagoon-facing openings land between $1,200 and $7,000, and a whole-home retrofit for a 1970s block rancher can reach $16,000-$18,400 before any structural work. What moves the number is the impact rating, the glass package (low-E, argon, tint), the frame material, and whether the rough opening needs repair after 50 years of Florida weather. We write fixed line-item quotes in Jensen Beach, no surprise change orders, and the estimate is always free. Call (754) 324-4646 and we’ll put numbers on paper specific to your street and your openings.
We Also Serve Cities Near Jensen Beach
Our crews run Window Installation in Jensen Beach and the neighboring communities along the Treasure Coast, including Stuart, Palm City, Port Salerno, and Hobe Sound. Same local code knowledge, same Martin County permit familiarity, same two-direction salt air awareness. If you’re on the edge of Jensen Beach proper, give us a call and we’ll tell you straight whether your address falls in our service area and what the wind-load requirements look like for your specific street.
Serving Jensen Beach, FL - Our Local Coverage Area
We’re based in the Jensen Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Jensen Beach
Under Martin County’s wind-borne debris region designation, new windows can either be impact-rated or protected by an approved shutter system. If you have code-compliant shutters, you can install non-impact windows and still pass a four-point inspection. The catch is that the shutter approval has to be on file, and many of Jensen Beach’s older homes have shutters that were never permitted or documented. Call (754) 324-4646 and we’ll walk you through what your specific property actually needs before you spend a dollar.
Jensen Beach falls under Martin County’s wind-borne debris region, which requires new windows to carry a Florida Building Code product approval with a design pressure (DP) rating appropriate to the opening size and elevation. Most standard residential openings need DP 50 or higher, with larger picture windows and second-story openings requiring higher numbers. We pull the NOA for every product we quote and file the permit with the exact approval number, so the Martin County inspector sees matching documentation on site.
Citizens requires a four-point inspection confirming impact-rated or protected openings before it will write or renew a policy in Martin County, so a documented install can mean the difference between staying insured and getting non-renewed. Many Jensen Beach homeowners saw their private carrier drop them, and documenting the upgrade with the NOA paperwork and a passing inspection is the fastest route to a policy at a rate you can live with. We leave every impact install with the product approval in hand and the permit closed, so the inspection is a formality.
Fog between the panes means the IG seal has failed and the argon fill is gone. On some post-2004 impact frames, the sash can be reglazed with a new insulated glass unit, but the frame has to be in good enough condition to hold a new IG and still meet its original DP rating. What we see in Jensen Beach is that the aluminum frames on lagoon-side homes pitted and corroded at the same rate the seals failed, so reglazing alone often leaves you with a weakened frame. A field measure tells us which path makes sense, and the estimate is free.
Yes. If the openings were legal when the home was built and you’re not replacing them, Martin County does not require you to upgrade to impact-rated units. The problem arrives when you try to sell, renew a Citizens policy, or pull a permit for other work, because a four-point inspector will flag jalousie windows as non-compliant with current wind-borne debris code. Many Jensen Beach homeowners leave the jalousies until the insurance letter or the sale contract forces the upgrade, and we handle that replacement with a written quote that shows exactly what the code requires.
If you’re ready to get your Jensen Beach windows measured, quoted, and installed by a crew that understands Martin County wind-load requirements and salt air corrosion, call (754) 324-4646 for a free estimate. We’ll come to your street, measure every opening twice, and put the numbers and the NOA paperwork on paper before you decide anything.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jensen Beach and the Treasure Coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.