Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Jensen Beach
Window replacement in Jensen Beach costs between $850 and $2,400 per opening for most homes, with a full-frame impact-rated install on a 1960s concrete block house typically landing between $1,400 and $2,100 per window. That’s the honest range we quote, and it’s what the Martin County inspection and your insurance carrier will look at when the job is done. We’ve worked the neighborhoods along Savannah Road, the canal-front streets west of Indian River Drive, and the barrier island side for years, so we know what these homes need before we ring the bell. Call (754) 324-4646 and we’ll walk your house with you, measure every opening, and put the numbers on paper.
Our Window Replacement crew serves Jensen Beach from our South Florida office, with scheduling coordinated so you’re not waiting on a regional call center. When you call, a person answers. When we set a time, we’re there.
Key Takeaways for Jensen Beach Homeowners:
- Martin County wind-borne debris rules mean any permitted replacement opening must meet impact or shutter-protected standards, not just look good.
- Post-2004 impact windows are now hitting the 20-year seal and hardware failure mark across Jensen Beach. You may already have compliant glass that’s quietly failing.
- Citizens Insurance four-point inspections are driving many Jensen Beach replacements. Documented compliance is the difference between keeping your policy and losing it.
- Every quote includes both manufacturer warranty layers registered in writing and our Done Right Promise.
Why TruePane Windows & Doors Is Jensen Beach’s Preferred Window Replacement Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We’ve carried that standard into Jensen Beach homes for years, and the work we do here is the same work we’d do on our own mothers’ houses. Background-checked, uniformed technicians. Every opening measured twice. Manufacturer lines quoted side by side on paper so you see exactly what you’re buying.
Jensen Beach homeowners tell us the same thing: they’ve been burned by a fogged seal, a door that binds in July, or a contractor who stopped answering the phone. We don’t operate that way. Our Window Replacement in Jensen Beach work is backed by The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway. If something isn’t done right, the Done Right Promise means we make it right. No paperwork fights, no arguing.
We’ve worked homes from the Indian River Lagoon side to Hutchinson Island, and we know what salt air from two directions does to a window over two decades. That local knowledge changes how we spec flashing, how we inspect existing openings, and how we quote. It’s the difference between a bid and a square deal.
Our Window Replacement Services in Jensen Beach
Jensen Beach’s housing stock splits roughly in two: original 1960s-1980s concrete block homes with jalousie or single-pane aluminum sliders, and mid-2000s rebuilds installed after Hurricanes Frances and Jeanne. Both groups need different work, and we handle all of it.
Full Frame Replacement
For Jensen Beach’s older concrete block homes, full frame replacement is usually the honest answer. The original jalousie or aluminum slider openings predate Florida’s post-Andrew and post-2004 wind-load code, which means a slim insert won’t bring the wall assembly up to current Martin County standards. We remove the old frame, inspect the rough opening for water damage, install new construction flanges with proper backer rod and flashing, and set a window rated for the wind zone your home actually sits in. On canal-front streets west of Indian River Drive, we regularly see old frames corroded to powder from two decades of lagoon and Atlantic salt air. A full frame replacement fixes the opening, not just the glass sitting in it.
Insert Window Replacement
If your home is a mid-2000s rebuild with structurally sound frames, an insert replacement can be the more affordable path. We set a new window inside the existing frame, which preserves your stucco and interior trim. This works well for Jensen Beach homeowners whose post-2004 impact frames are still square but whose glass has failed. The catch: inserts don’t fix a corroded or sagging frame. We’ll tell you honestly which approach your house needs, and why.
Storm Window Replacement
Storm window replacement in Jensen Beach means something specific here. Martin County sits in a wind-borne debris region under the Florida Building Code, so any permitted replacement opening must meet impact-rated or shutter-protected standards. Some homeowners pair a standard window with code-approved shutters. Most opt for impact-rated glazing that carries its own missile-rating. We quote both paths side by side on paper, including the wind-load rating each product carries and what the inspection will verify.
Energy-Efficient Upgrade
Jensen Beach’s salt-laden air attacks more than frames; it also eats weatherstripping and accelerates IG unit spacer bar corrosion. Upgrading to Energy-Efficient Windows in Jensen Beach isn’t just about the electric bill. It’s about stopping the air leak that’s been pulling humidity into your wall cavity and the fogged glass that means your argon fill is gone. We spec low-E coatings and argon-filled dual-pane units for Florida’s heat and humidity, then register the energy performance rating with your manufacturer warranty so the paperwork matches the product.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jensen Beach
We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, and CGI. For Jensen Beach’s impact-glass market, PGT and CGI carry the local weight most homeowners ask about, because those products have decades of documented performance in Florida wind zones. We stock common parts and hardware for Jensen Beach jobs so you’re not waiting on a distributor. Every quote lines up two or three manufacturer options side by side with their wind-load ratings and warranty durations stated plainly.
Common Window Replacement Problems We See in Jensen Beach Homes
- Salt-corroded aluminum frames on early-2000s impact windows. Frames are failing at the corners and jamb pockets, causing sagging sashes and air leaks. We see this most on canal-front homes west of Indian River Drive and on the barrier island side, where salt air comes from both directions.
- Fogged glass in 20-year-old impact units. Insulated glass units installed after Frances and Jeanne are now showing seal failure, especially on east-facing openings that get morning sun and afternoon thunderstorms. If you’re wiping fog off the inside of the glass every morning, the argon is gone and the seal is shot.
- Wind-driven rain leaking around builder-grade flashing tape. Post-2004 impact windows installed with cheap flashing tape and no backer rod are leaking around the fin during summer squalls. Water gets into the wall cavity and you don’t know until the drywall stains or the inspector flags it.
- Insurance-driven replacement pressure. Many Jensen Beach homeowners were dropped by private carriers and forced into Citizens, which now requires a four-point inspection confirming impact-rated or protected openings. If your inspection failed, window replacement isn’t optional; it’s the condition of staying insurable.
Pricing for Window Replacement in Jensen Beach, FL
Here’s what Jensen Beach homeowners should expect to pay, based on the work we see most often:
- Insert window replacement (standard size, mid-2000s home): $850-$1,400 per opening
- Full frame replacement (concrete block, 1960s-1980s home): $1,400-$2,100 per opening
- Impact-rated full frame replacement (PGT or CGI, wind-borne debris zone): $1,800-$2,400 per opening
- Storm window replacement with code-approved shutter pairing: $1,100-$1,700 per opening
- Whole-house replacement (8-12 openings, typical 3/2 Jensen Beach rancher): $12,000-$24,000 depending on impact rating and frame condition
What moves the number: whether your existing frames are square enough for an insert or need full replacement, whether you’re in a wind-borne debris zone requiring impact glazing, and whether a four-point inspection has already flagged your openings. We quote with no surprise line items on the bill. Estimates are free. Call (754) 324-4646 and we’ll put exact numbers on paper for your house.
We Also Serve Cities Near Jensen Beach
Our crews work throughout Martin County and the northern Palm Beaches. If you’re in Stuart, Palm City, Port Salerno, or Hobe Sound, we serve those communities with the same crews and the same standard. Whether you’re looking for Window Replacement in Jensen Beach or the surrounding area, the phone number is the same and the answer is a live person.
Serving Jensen Beach, FL - Our Local Coverage Area
We’re based in the Jensen Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Jensen Beach
Yes, in nearly all cases. Jensen Beach falls under Martin County’s wind-borne debris region designation in the Florida Building Code, which means any permitted replacement opening must be either impact-rated or protected by an approved shutter system, regardless of which room it serves. The code doesn’t care whether the opening faces the street or a backyard; it cares that the wall assembly resists wind-blown debris. A contractor who tells you interior bedroom windows can skip impact glazing is quoting work that won’t pass inspection. Call (754) 324-4646 and we’ll verify your specific wind zone and required rating before we quote anything.
You check three things: the manufacturer’s label on the frame, the product’s current listing status with Miami-Dade or FBC code bodies, and the condition of the seals and hardware. Many post-2004 impact windows in Jensen Beach are now 20 years old and showing seal failure, corroded frames, or hardware that no longer closes tight. A product can still meet code on paper but fail in the field. We inspect the labels, verify the ratings, and check for visible failure modes during a free estimate. If your windows are still compliant but failing physically, we’ll tell you that too. Call (754) 324-4646 to schedule a walkthrough.
Yes, and it’s the most common reason Jensen Beach homeowners call us. Citizens Property Insurance now requires a four-point inspection confirming impact-rated or protected openings for coverage. If your jalousie or single-pane aluminum sliders are original to a 1960s-1980s home, they will not pass. Replacing them with documented impact-rated units gives your inspector something verifiable to sign off on. We provide the paperwork: product labels, wind-load ratings, and completed permit documentation. That’s the evidence your carrier wants. Call (754) 324-4646 for a quote that includes the documentation, not just the glass.
A full frame replacement removes the entire existing window down to the rough opening and sets a new frame with new flashing and anchoring. An insert replacement leaves the existing frame in place and sets a new window inside it. For Jensen Beach’s concrete block homes, full frame is usually required when the original frame is corroded, sagging, or predates current wind-load code. Insert works when the frame is still structurally sound, common on mid-2000s rebuilds. We’ll tell you which one your house actually needs and why it matters for both the inspection and the warranty. Call (754) 324-4646 for an honest assessment of your openings.
In most cases, you need new insulated glass units. Fog between the panes means the seal has failed, the argon fill is gone, and the unit’s energy performance and visual clarity are permanently compromised. Some companies claim they can “defog” glass; we don’t offer that because it doesn’t restore the insulating value or the manufacturer warranty. The good news: if your frames are still square and compliant, we can often replace the glass units without replacing the entire window. That’s cheaper than a full replacement. Call (754) 324-4646 and we’ll tell you which path applies to your windows.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jensen Beach with honest window replacement work done right the first time.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.