Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Port St. Lucie
Door installation in Port St. Lucie means working with concrete block homes, wind-load codes, and salty air that eats aluminum frames faster than the manufacturer’s warranty assumes. We’ve spent years replacing entry doors, French doors, and storm doors throughout the city’s GDC-platted grid, from Torino to the riverfront streets off Port St. Lucie Boulevard. A typical entry door replacement here runs $900-$2,400 installed, and an impact-rated French door pair runs $2,800-$6,500 depending on size and glazing. If you need a straight answer about what your door has to meet under St. Lucie County code, call (754) 324-4646 and we’ll walk through it with you.
Key Takeaways for Port St. Lucie Homeowners
- Every permitted door replacement in Port St. Lucie must meet Florida Building Code wind-load requirements, even a single non-impact door swap on a 1980s CBS home.
- Saline air from the Indian River Lagoon and St. Lucie River corrodes aluminum door jambs faster here than nearly anywhere else on the Treasure Coast.
- A documented, compliant door installation can reduce your windstorm insurance premium, but only if the permit and inspection paperwork match.
- Most entry door installations in Port St. Lucie take one day, and we register both warranty layers in writing before we leave your driveway.
Why TruePane Windows & Doors Is Port St. Lucie’s Preferred Door Installation Company
We’re a second-generation glazier’s shop, founded by Dale Kessler in 2008, and our crews have been working Port St. Lucie neighborhoods long enough to know which GDC-era floor plans have the 36-inch openings and which riverfront homes need custom jamb rebuilds before a new slab will sit true. Our Door Installation team works in background-checked, uniformed crews, and every job carries the Done Right Promise. If it’s not done right, we make it right. No paperwork fights, no arguing.
Port St. Lucie homeowners call us because a live person answers the phone 24/7, and because our technicians measure every opening twice before ordering. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. In a city where post-2004 replacement doors are now hitting seal failure and frame corrosion, that kind of specificity matters more than a flashy estimate.
Our Door Installation Services in Port St. Lucie
Entry & Swing Doors
Most Port St. Lucie homes have standard 36-inch by 80-inch entry openings, which makes ordering fast but doesn’t remove the need for careful jamb inspection. On older CBS homes near the lagoon, we routinely find aluminum jambs that look solid from the outside but are flaking inside the wall cavity. We inspect the rough opening, replace or rebuild the jamb, and set the new door so it swings true through the hottest, most humid August afternoon. A typical impact-rated entry door installation in Port St. Lucie runs $1,200-$2,800, and we stock PGT and Andersen lines locally for faster turnaround.
Double & French Doors
French doors facing the St. Lucie River or the Indian River Lagoon take a beating from wind-driven salt spray, and many homes in the original GDC sections still have single-pane aluminum sliders that are nowhere near current code. Replacing a rear opening with a pair of impact-rated French doors usually runs $3,000-$6,800 in Port St. Lucie, with the spread driven by panel width, glass package, and whether the existing lintel needs reinforcement. We install CGI and PGT products frequently on this type of job, and we pull the permit before the first screw comes out.
Bifold & Folding Doors
Bifold and accordion door systems are showing up more often on Port St. Lucie’s newer construction and on remodels that open onto screened lanais. These are heavier systems, and the header support has to be right or the panels will bind within a season. We’ve installed multi-panel folding doors on homes near Torino and along Gatlin Boulevard, and we handle the structural review, permit filing, and St. Lucie County inspection as part of the job. A full folding door wall typically starts around $5,500 and runs upward depending on panel count and impact rating.
Pivot Doors
Pivot doors are a specific fix for wide entryways where a standard hinge layout would stress the frame and sag over time. They’re common on newer custom homes in the western reaches of Port St. Lucie, where larger slabs and heavier glass packages need the pivot hinge to carry the weight properly. We install pivot systems from CWS and Andersen, and we spend extra time on the subfloor and header blocking because a pivot door that’s off by a quarter inch will scrape or stick forever. Budget $3,200-$7,000 depending on slab size and hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port St. Lucie
We’re an authorized installer for more than a dozen manufacturer lines, and on Port St. Lucie jobs we lean heavily on PGT and CGI because their impact-rated products are engineered for Florida’s wind-load code requirements and their warranty paperwork is straightforward. We also work with CWS and Ply Gem on projects where the homeowner wants a specific look or budget point. We stock common replacement components locally for Port St. Lucie customers, which means a broken threshold or damaged weatherstripping on a recent install turns into a fix rather than a two-week parts order.
Common Door Installation Problems We See in Port St. Lucie Homes
- Corroded aluminum jambs in lagoon-adjacent homes. Saline air from the Indian River Lagoon and St. Lucie River pushes inland further than most people expect, and the aluminum jambs on 1980s and 1990s CBS homes flake and fail from the inside out. We’ve opened walls where the jamb looked fine from the outside and was nearly gone where the screws bite.
- Seal failure in post-2004 doors. Doors replaced after Frances and Jeanne are now 20 years old, and sustained UV at this latitude degrades vinyl glazing seals faster than manufacturer ratings. A fogged insulated glass unit means the argon is gone, and the door no longer performs to its wind and thermal rating even if the panel looks intact.
- Unpermitted door swaps that fail final inspection. Homeowners who swapped a non-impact door without pulling a permit sometimes discover at resale or refinance that the work doesn’t meet current Florida Building Code. We’ve had to remove and reinstall doors that were never documented, and the cost to redo it correctly always exceeds what a permitted install would have been the first time.
- Original jalousie and single-pane sliders still in service. A large share of Port St. Lucie’s original GDC housing still has single-pane aluminum doors that are 30 to 50 years old and wholly non-impact-rated. They’re not just inefficient; they’re unsupported against the wind-load standard the county now enforces on any permitted replacement.
Pricing for Door Installation in Port St. Lucie, FL
Here’s what you can expect to pay in Port St. Lucie for common door installations. These are honest ranges from current 2025-2026 project history in the city.
| Project | Typical Installed Range | Notes |
|---|---|---|
| Single entry door (standard, non-impact) | $900-$1,800 | On CBS homes with reusable jambs. |
| Impact-rated entry door (PGT, PGT, Andersen) | $1,200-$2,800 | Includes jamb repair if needed. |
| Storm door over existing entry | $400-$900 | Permit not typically required; confirm with city. |
| French door pair (impact-rated, CGI or PGT) | $2,800-$6,500 | Larger openings and lintel reinforcement add cost. |
| Folding door wall | $5,500 and up | Depends on panel count and impact rating. |
| Pivot door system | $3,200-$7,000 | Slab size and hardware drive most of the spread. |
What moves the price in Port St. Lucie? The condition of your existing jamb, whether the opening needs structural reinforcement to meet wind-load code, the glass package you choose, and whether the door is a standard 36-inch width or something wider. We give written line-item quotes, and we don’t add change orders once we’ve started unless you ask for something different. Call (754) 324-4646 to schedule your free estimate.
We Also Serve Cities Near Port St. Lucie
Our crews work the full stretch of the Treasure Coast around Port St. Lucie, and we regularly take door installation calls from Stuart, Hobe Sound, Jensen Beach, and Palm City. The same wind-load code requirements and saline corrosion patterns apply up and down this stretch of the coast, and our familiarity with the local inspection offices means fewer surprises on permit day.
Serving Port St. Lucie, FL - Our Local Coverage Area
We’re based in the Port St. Lucie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Port St. Lucie
All new or replacement exterior doors in Port St. Lucie must meet Florida Building Code wind-load requirements for the High Velocity Hurricane Zone or the regional wind-speed designation, which for this area means your door and frame assembly must be rated for wind pressures up to roughly 150 mph gusts, depending on your exact parcel’s exposure category. Impact-rated glazing or a Miami-Dade NOA-approved shutter system is required for any glazed opening facing the code’s defined windborne debris region. Call (754) 324-4646 and we’ll confirm what your specific address requires before you order anything.
Yes. Port St. Lucie does not grandfather non-compliant door replacements on a permitted project. When you pull a permit to swap a single door, even a side door, the replacement must meet current Florida Building Code wind-resistance standards. That means any glazed opening must be impact-rated or protected by an approved shutter or panel system. We’ll pull the permit, install the compliant door, and handle the St. Lucie County inspection so the paperwork matches the work.
A properly permitted, inspected, impact-rated door installation can qualify you for windstorm mitigation credits on your Florida homeowners policy, and many Port St. Lucie homeowners see a measurable premium reduction after submitting the right documentation. The key is that both the permit and the final inspection record must match the manufacturer’s NOA or Florida Product Approval number. We hand you the full paperwork packet, including both warranty layers registered in writing, so the discount isn’t held up by missing forms. Your agent can give you an exact number once the documents are in hand; call (754) 324-4646 to get the installation scheduled.
On lagoon-facing openings, we rarely repair pitted aluminum frames because the corrosion has usually compromised the structural channel that holds the glass under wind load. A patch or paint over pitting leaves impact-rated panels unsupported where it matters most. We inspect the full jamb and panel assembly, and in most riverfront cases we recommend a full replacement with new impact-rated units from PGT or CGI, plus a rebuilt jamb with proper flashing. That’s the install that actually holds up to the next storm, and it’s the one that passes inspection and earns the insurance credit.
In most cases, adding a storm door over an existing entry door in Port St. Lucie does not require a building permit because you’re not modifying the structural opening or removing the primary exterior door. If the installation involves altering the jamb or threshold, that can trigger a permit, so we check with the city before starting. We’ll tell you what’s needed and handle it either way. Call (754) 324-4646 to schedule a free estimate and we’ll confirm the permit status for your specific home.
Last month, our crew replaced a corroded jalousie side door with an impact-rated Andersen 400 Series on a 1980s GDC home in the Rivella neighborhood. The original aluminum jamb had oxidized to flaking, the insulated glass unit was fogged from years of saline air, and the owner hadn’t realized the permit would trigger code compliance. We pulled the permit, installed the new door with jamb flashing tape, scheduled the St. Lucie County inspection, and handed over the paperwork for their windstorm insurance discount. That’s the whole job, done right, with nothing left for the homeowner to chase.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port St. Lucie with honest glazing craft and documented, code-compliant door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.