Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Jensen Beach
Energy-efficient window replacement in Jensen Beach typically runs $650-$1,400 per opening for impact-rated low-E units, installed. Most full-home replacements on 1960s-1980s concrete block homes land between $9,000 and $22,000, depending on frame material, glass package, and how much flashing repair the openings need. If you’re calling from Jensen Beach, the answer is (754) 324-4646. A live person picks up, and we’ll tell you straight what a window audit will show before we ever quote a dollar.
We know Jensen Beach the way a glazier knows his own template: the older canal-front homes off Savanna Road, the Hutchinson Island condos facing the Atlantic, the 1970s ranch houses inland near Jensen Beach Boulevard where the original jalousie windows are still fighting the salt air. Our crews are in Jensen Beach weekly. The drive is short, the scheduling is honest, and the work gets done in one visit more often than not.
Why TruePane Windows & Doors Is Jensen Beach’s Preferred Energy-Efficient Windows Company
Jensen Beach sits between two saltwater bodies: the Indian River Lagoon to the west and the Atlantic a mile to the east. That is not a postcard detail. It means the air corrodes aluminum frames from both directions, and it means the windows we pull out of Jensen Beach homes look different from what we pull out of Stuart or Palm City. We plan for that. Our technicians carry corrosion-specific replacement hardware and know to check the spacer bars and frame channels before ordering glass, because a unit that measures fine can still be rotting from the inside.
Dale Kessler founded this company in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. Years of combined glazing tradition backs the work, not a franchise playbook. We hire locally, train apprentices into journeymen, and show up in uniform, background-checked, and ready to measure every opening twice. Jensen Beach homeowners call us because they have been burned before, usually by a fast post-hurricane install that left a fogged seal and a frame that binds by July. We are the company they call second.
Every job carries the Done Right Promise. Both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves your driveway. That is The Keystone Standard, and we put it on paper. No fine print that covers neither. No arguing about who is responsible when a seal fails at year two. If it is not done right, we make it right.
Our Energy-Efficient Windows Services in Jensen Beach
Low-E & Argon Gas Glass
Low-E coating and argon gas fill are the two things most legacy impact windows in Jensen Beach are missing. The 2004 wave of post-Frances and post-Jeanne installs prioritized impact rating over energy performance, which means many of those units were built without low-E glass and with plain air between the panes. On a canal-front home where the afternoon sun bakes the west wall, that adds up to a hot house and an air conditioner that never cycles off. We replace those aging units with low-E coated, argon-filled insulated glass that meets current Florida Building Code energy standards. A typical low-E and argon gas retrofit in Jensen Beach runs $350-$700 per opening, installed.
ENERGY STAR Replacement Windows
ENERGY STAR certification for south Florida is not the same as it is for Ohio. The qualification is based on SHGC, or solar heat gain coefficient, because our climate is cooling-dominated. A window that earns the ENERGY STAR label in the Treasure Coast has to block meaningful solar heat while still letting in daylight. For Jensen Beach specifically, we recommend units with an SHGC of 0.25 or lower and a U-factor of 0.30 or lower. Full ENERGY STAR replacement window packages for a Jensen Beach ranch home typically run $10,000-$20,000 before any insurance or utility rebates. The free estimate gives you a written line-item price, not a ballpark.
Double & Triple Pane Windows
Double-pane is the standard we install most in Jensen Beach. It is the workhorse. Triple-pane adds another chamber of insulation and another layer of sound dampening, which matters on Hutchinson Island where Atlantic surf noise is constant and on the mainland where Indian River Drive traffic hums through older single-pane sliders. The cost difference is real: triple-pane runs 20-35% more than double-pane for the same opening. For most Jensen Beach homes, double-pane with low-E and argon is the right call. For waterfront rooms with direct sun and wind exposure, we will quote both side by side on paper so you see the difference in dollars and in performance. Typical double and triple pane replacement in Jensen Beach runs $650-$1,400 per window for full frame replacement, with triple-pane on the upper end.
UV-Blocking & Fade Protection
Furniture, flooring, and artwork facing unprotected windows in Jensen Beach fade fast. The UV index here is high year-round, and the salt haze does not filter the radiation the way northern cloud cover does. Low-E coatings block 60-75% of UV rays, and we can spec additional tinted interlayers for rooms with especially damaging western or southern exposure. Homeowners on the barrier island tell us they replace upholstery and area rugs every five to seven years. The right glazing slows that clock. UV-blocking glass packages in Jensen Beach add roughly $60-$150 per window over standard low-E, depending on the coating and tint.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jensen Beach
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. When a Jensen Beach customer calls with a failed PGT impact unit from the 2004 era, we can source the correct replacement glass, not an aftermarket approximation. We also work with CWS and ES Windows for higher-end coastal applications where both swing pressure rating and energy performance matter. Our crews keep common replacement hardware and sealant kits stocked locally, which keeps most Jensen Beach jobs moving without a second wait on a factory order. When you call (754) 324-4646, we’ll tell you which brands we recommend for your specific opening, not just the one we happen to stock.
Common Energy-Efficient Windows Problems We See in Jensen Beach Homes
- Failed seals in 2004-era impact units. The double hurricane strike of Frances and Jeanne pushed thousands of impact window installs into Jensen Beach within two years. Those units are now nearing two decades old, and the seals are failing. When the argon vents and moisture gets between the panes, the glass fogs and the thermal performance drops to near single-pane levels.
- Corroded aluminum frames from dual-direction salt air. The Indian River Lagoon on one side and the Atlantic on the other means Jensen Beach gets salt-laden air from everywhere. Aluminum frames and multi-point hardware corrode faster here than almost anywhere else on the Treasure Coast. We routinely pull frames with pitting so deep the original glass can no longer seat properly.
- Missing low-E coatings on early impact glazing. The 2004 code push was about surviving wind-borne debris, not about energy performance. Many of those early impact units have no low-E coating and no argon fill. They protect the house, but they also turn west-facing rooms into greenhouses.
- Water intrusion at the flashing tape. Hurried post-hurricane installations often skipped proper flashing details around the jamb and sill. We have opened Jensen Beach walls to find rotted wood bucks and hidden frame damage behind the stucco, the result of water that entered through a gap small enough to miss for fifteen years.
Pricing for Energy-Efficient Windows in Jensen Beach, FL
A single energy-efficient replacement window in Jensen Beach runs $650-$1,400 fully installed, depending on frame material, glass package, and whether the opening needs flashing repair or wood buck replacement. A full-house replacement on a 1970s concrete block home with 8-12 openings typically lands between $9,000 and $18,000. Canal-front and barrier island homes with exposed openings and corrosion rehab often push to $20,000-$25,000.
What moves a Jensen Beach quote more than anything else is what we find under the old window: rotted bucks, corroded fasteners, or framing that was never flashed properly. That is why we inspect first and quote second. The estimate is free, it is line-item, and the price we write is the price you pay, including any permit work. Call (754) 324-4646 to schedule yours.
We Also Serve Cities Near Jensen Beach
Our crews work Jensen Beach and the surrounding Treasure Coast communities every week. If you are in Stuart, Palm City, Port Salerno, or Hobe Sound, the same team and the same written pricing applies. You can see the full scope of what we do on our Energy-Efficient Windows page. Or call (754) 324-4646 and tell the person who answers where you are.
Serving Jensen Beach, FL - Our Local Coverage Area
We’re based in the Jensen Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Jensen Beach
The impact windows installed in the two years after the 2004 hurricanes were built for structural survival, not for two decades of Jensen Beach salt air. Most had no low-E coating, no argon fill, and aluminum frames that corrode quickly between the Indian River Lagoon and the Atlantic. Seals fail, glass fogs, and the units lose both their energy performance and their long-term structural integrity. If your house got new windows in 2005 or 2006, an audit will likely show several units near the end of their service life. Call (754) 324-4646 and we’ll take a look.
Yes, provided they are installed with impact-rated glazing and frame components that meet current Florida Building Code wind-borne debris requirements for Martin County. The four-point inspection looks at roof, electrical, plumbing, and HVAC, plus opening protection. New impact-rated energy-efficient windows satisfy the opening protection line and typically help homeowners stay insurable with Citizens or qualify for private carrier coverage again. We pull the permit and the inspection passes become part of your paper trail. Call (754) 324-4646 to discuss your specific policy requirements.
Salt air corrodes the aluminum spacer bars and frame channels that hold insulated glass units together. Once the spacer corrodes, the hermetic seal breaks, the argon or krypton gas vents, and the unit’s insulating gap becomes ordinary air. The U-factor rises and the SHGC worsens because the low-E coating is now exposed to interior humidity and begins to degrade. A window that started at U-0.30 and SHGC-0.25 can effectively perform like a single-pane unit within a decade if the frame and spacer are not corrosion-resistant. In Jensen Beach, we spec corrosion-resistant stainless steel or warm-edge spacer systems specifically to slow this failure mode. Call (754) 324-4646 for an exact quote on corrosion-resistant replacement units; estimates are free.
Focus on three things: evidence of seal failure (fogging, condensation, or distorted glass), the condition of the frame and any wood buck behind the stucco, and whether the unit’s SHGC and U-factor ratings still match what was originally specified. On 1970s Jensen Beach homes with original single-pane aluminum sliders, the audit will almost always show single-digit U-factors that would not pass today’s energy code. We check the glass, the frame, the flashing, and the weatherstripping, then give you a written summary with line-item pricing. Call (754) 324-4646 to schedule an energy audit.
Yes, window replacement in Jensen Beach requires a Martin County building permit, and the replacement must meet current Florida Building Code standards. That means impact-rated glazing or shutter-protected openings for any permitted replacement work. Most homeowners choose full impact-rated replacement windows rather than adding shutters later, because the insurance benefit and the energy performance come together in the same unit. We pull the permit, coordinate the inspection, and get it passed. That is part of the job, not an extra charge layered on after the fact. Call (754) 324-4646 to walk through your specific opening protection requirements.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.