Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Stuart
Sliding patio door replacement in Stuart typically runs $2,800 to $7,500 installed, depending on the opening size and whether you need a standard vinyl or impact-rated heavy-duty system. You’ll also want to know that in Martin County’s Wind-Borne Debris Region, any permitted sliding door you install must carry a wind-load rating that meets code; that’s not a suggestion, it’s the law. TruePane has been replacing and upgrading doors with our Door Installation - Stuart service long enough to know exactly what the inspector will check, and we quote it honestly from the first visit. Call (754) 324-4646 for a free estimate, and we’ll walk you through what your particular opening needs.
Key takeaways:
- All permitted sliding and patio door replacements in Stuart must meet Martin County wind-load requirements. A non-impact door will typically fail inspection.
- Salt air near the St. Lucie Inlet corrodes standard aluminum tracks and hardware within 8 to 12 years. Marine-grade components are not optional on the water.
- Most Stuart jobs range from $2,800 to $7,500. Doors with panoramic glass panels or oversized openings run higher.
- Every TruePane job includes the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before we leave your driveway.
Why TruePane Windows & Doors Is Stuart’s Preferred Sliding & Patio Doors Company
Stuart homeowners have a different set of problems than people ten miles inland in Palm City or Hobe Sound. The salt aerosol that rolls off the St. Lucie Inlet eats aluminum. The wind loads that come with living at 150 to 160 mph ultimate design speed mean your door is a structural component, not a convenience. We know this because we’ve been in hundreds of Stuart homes along the St. Lucie River, the Indian River Lagoon seawall neighborhoods, and the 1950s and 60s CBS subdivisions that make up most of the city’s housing stock.
TruePane was founded by Dale Kessler in 2008 on a straightforward rule: if the pane is not true, the job is not done. That principle governs every sliding door we install in Stuart, from a standard vinyl replacement in a North River Shores rancher to a full panoramic impact system on a riverfront lot off Indian Street. Our Sliding & Patio Doors crew is background-checked and uniformed, and they measure every opening twice before a single screw goes in. We’re an authorized installer for PGT, CGI, and Ply Gem, among others, which matters when you’re choosing an impact-rated product that has to satisfy Martin County’s product approval requirements. The Keystone Standard means both warranty layers, manufacturer and workmanship, get registered in writing with durations stated. You’ll have the paperwork before the truck leaves the driveway.
We serve Stuart with the kind of follow-through you’d expect from a company that plans to be here in thirty years. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form. When your sliding door jams in July and the humidity has already won, you’ll get a person on the line.
Our Sliding & Patio Doors Services in Stuart
Patio Sliding Doors
The standard patio slider is the most common door we replace in Stuart, and it’s also the one most likely to be critically underspecified. A basic vinyl sliding door in a typical Stuart CBS home runs $2,800 to $4,200 installed. But if your existing door predates Florida’s 2002 impact requirements, and many in Stuart’s 1960s and 70s homes do, you’ll need to step up to an impact-rated unit. That typically pushes the price to $4,500 to $7,000. We quote both options side by side on paper so you see exactly what you’re buying. The cheap quote that doesn’t include impact glazing will fail Martin County inspection, and you’ll be paying for the door twice.
Panoramic Sliding Systems
On a Stuart waterfront lot, the view is the whole point. Panoramic sliding systems use wider glass panels and thinner frames to open up a wall of glass facing the water. These are heavier, they require stronger tracks and sturdier header engineering, and they’re the systems most likely to be ordered as impact-rated from the start. Expect to pay $6,500 to $15,000 or more depending on the number of panels and the glass rating. Salt air makes marine-grade hardware mandatory here, not a line item to skip. We’ve replaced panoramic systems along the St. Lucie River where the original hardware seized up inside eight years from corrosion.
Heavy-Duty Sliding Doors
Oversized openings, Andersen or PGT multi-point locking hardware, and doors that get opened and closed twenty times a day need a different class of track and roller. Heavy-duty sliding doors in Stuart typically run $4,000 to $9,000 installed, and the price is driven by the size of the glass and the wind-load rating. In a Wind-Borne Debris Region, the bigger the glass, the more engineering goes into the frame. A compliant heavy-duty door includes a product approval number that your insurance company can actually look up. The quote should list it. Ours do.
Pocket & Barn Doors
Pocket sliding doors disappear into the wall, which is a clean look in Stuart’s older homes where space is tight. The catch: pocket doors are harder to retrofit because the wall cavity may not be framed for the pocket hardware, and in a CBS home, you’re often working with concrete block that wasn’t designed for a hidden door frame. Depending on the wall construction, a pocket door installation in Stuart runs $3,200 to $7,000. Barn doors ride on an exposed track, which makes them simpler to install but less useful for exterior applications where wind and water are involved. For an exterior opening in Stuart, a barn door still has to meet the impact and wind-load code. We’ll tell you plainly if a barn door doesn’t make sense for your opening, and we’ll show you what does.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stuart
We’re an authorized installer for PGT, CGI, and Ply Gem, and we stock common parts and replacement hardware for Stuart Viewlux service customers so a sticking roller or failed lock doesn’t leave you waiting on a freight truck. PGT’s impact-rated Vinyl and Aluminum lines are the most common products we install in Stuart because they carry Martin County product approvals and they’re sourced in Florida, which means shorter lead times. CGI and CWS also make marine-grade hardware packages that hold up well in Stuart’s salt-air corridor. We’ll quote whatever fits your opening and your wind zone, side by side, so you can see the price difference and what it buys.
Common Sliding & Patio Doors Problems We See in Stuart Homes
- Corroded aluminum tracks and hardware. Salt aerosol from the St. Lucie Inlet is relentless. Standard aluminum tracks on doors within a mile or two of the water routinely show pitting, sticking, and lock failure within eight to ten years. Marine-grade stainless or fusion-welded vinyl is the fix.
- Non-impact doors that can’t pass inspection. If your 1980s sliding door predates the 2002 Florida Building Code, it almost certainly lacks the impact rating Martin County requires today. A permitted replacement must meet current wind-load standards; there’s no grandfather clause that lets you skip it.
- Failed insulated glass seals. In Stuart’s humidity and salt, the argon-filled glass units in patio doors often lose their seal within a decade, leaving fog between the panes. The door still slides, but the insulation value is gone and the glass needs to be replaced as a unit.
- Warped or sagging panels on oversized openings. Big glass in a windy salt environment puts real stress on the frame. We see doors where the panel has settled enough to drag on the track, often because the original header or roller system wasn’t heavy-duty enough for the opening size. Upgrading the roller and track hardware solves it before the glass suffers.
Pricing for Sliding & Patio Doors in Stuart, FL
A standard patio sliding door from our Custom Windows & Doors - Stuart line runs between $2,800 and $4,200 installed. An impact-rated patio slider runs $4,500 to $7,000. A heavy-duty or oversized sliding system typically runs $4,000 to $9,000 depending on the glass area and wind-load engineering. A panoramic multi-panel system can run $6,500 to $15,000 or more. What moves the price in Stuart specifically is the impact glazing requirement, which adds $1,500 to $2,500 per door over a non-rated unit, and the corrosion-resistant hardware and track that coastal exposure demands. A compliant quote from us lists the product approvals, the wind-rating, both warranty durations, and the permit line. If a quote doesn’t include those line items, it’s not an apples-to-apples quote. Call (754) 324-4646 and we’ll walk your opening and give you a written number with no vague language.
We Also Serve Cities Near Stuart
While this page focuses on Sliding & Patio Doors in Stuart, our crews also work throughout Jensen Beach, Palm City, Port Salerno, and Hobe Sound. The same impact requirements and salt-air rules apply along the Martin County coast, and we quote them the same way. If you’re in a neighboring city, call (754) 324-4646 and ask for the same free estimate we give in Stuart.
Serving Stuart, FL - Our Local Coverage Area
We’re based in the Stuart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Stuart
Stuart sits in Martin County’s Wind-Borne Debris Region, which carries ultimate design wind speeds of 150 to 160 mph along the coast. Any permitted sliding or patio door replacement must use a product with Florida Product Approval or Miami-Dade NOA documentation showing it meets the required design pressure for your specific opening. The exact required rating depends on the door’s size, height above grade, and location on the building envelope. We calculate that per opening and quote it on paper. A door without a compliance record will fail inspection, and the failure will be on your permit. Call (754) 324-4646 for a quote that includes the math.
No. The Wind-Borne Debris Region requirement applies to all of Martin County, not just waterfront lots. Non-impact sliding doors do not meet the code for a permitted replacement anywhere in Stuart, regardless of how far from the St. Lucie River you are. Some homeowners choose to ignore this and install non-rated doors without permits; they then discover the issue when the door fails inspection on a later sale, or when an insurance claim is denied because the unpermitted work was never documented. A compliant impact door is not optional, it’s the minimum standard every permitted Stuart replacement has to meet.
The St. Lucie Inlet puts Stuart in one of the most corrosive salt-air corridors on the Treasure Coast. Salt aerosol from the open Atlantic settlement on aluminum frames, tracks, and hardware, and the electrochemical reaction pits the metal and swells the joints. Standard-grade aluminum, which has little to no marine protection, starts sticking and jamming within eight to ten years on Stuart’s river-facing lots. The same door might last twenty years in an inland county. The fix is marine-grade aluminum or fusion-welded vinyl with stainless steel hardware. We specify these components on every Stuart job within salt-air reach, which is most of the city.
Often, yes. Florida insurance carriers can offer premium credits for wind mitigation features that are documented, and an impact-rated sliding door is a credit-qualifying element. But the documentation matters. If your opening is protected by an impact product with Florida Product Approval documentation, and the installation was permitted and inspected, that’s what a carrier will credit. If there’s no paper, there’s no credit. We provide the product approval numbers and complete the permit record so your wind mitigation report has what it needs. Ask your agent about the specific credit. Call (754) 324-4646 for the compliance paperwork from our side.
A complete Stuart patio door quote includes the wind-load calculation and the product approval or NOA number for the door, the impact rating of the glass, the corrosion resistance of the track and hardware, a permit line, and the durations of both the manufacturer and workmanship warranties. A cheap quote often lists the door price and labor and stops there, and the missing compliance items are exactly what you’ll pay for later. In a 1960s CBS home along the St. Lucie River seawall, our crew replaced a corroded, non-impact sliding patio door with a new impact-rated vinyl system using fusion-welded frames and marine-grade hardware. The original aluminum track and jamb showed seal failure and salt pitting after only nine years. The new install passed Martin County inspection and included flashing tape and documented product approvals for the homeowner’s wind mitigation report. That’s what a compliant quote looks like. Call (754) 324-4646 and we’ll put yours in writing, with no vague language and no surprise line items.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stuart, FL since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.