Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Jensen Beach
Door installation in Jensen Beach carries one question most homeowners skip until it’s too late: will the frame and hardware survive the salt air? The answer decides whether your new door lasts twelve years or thirty. We’re TruePane Windows & Doors, and we’ve been setting doors in this town long enough to know which materials survive the two-direction salt exposure that makes Jensen Beach different from Stuart, Palm City, even Port Salerno. Call (754) 324-4646 for a free estimate from a crew that understands what the Indian River Lagoon and the Atlantic do to a door.
Why TruePane Windows & Doors Is Jensen Beach’s Preferred Door Installation Company
Jensen Beach sits between the Indian River Lagoon on the west and the Atlantic a mile east. That geography means salt-laden air reaches nearly every residence in town, even homes set back from open water. Door frames, hinges, threshold plates, and multi-point lock internals corrode faster here than in inland Treasure Coast communities. We spec materials accordingly: stainless steel fasteners, fusion-welded vinyl frames, marine-grade flashing tape, and hardware with coated internals instead of bare brass. That’s not an upsell. It’s the difference between a door that still operates smoothly at year twenty and one that seizes at year nine.
Our Door Installation team has replaced enough corroded aluminum sliders on canal-front homes to know the failure pattern by heart. We’re an authorized installer for PGT, CGI, among others, and we register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s our Keystone Standard. If something isn’t right within 90 days, we come back and fix it under the Done Right Promise, no paperwork fight. For Jensen Beach homeowners facing four-point inspections and Citizens insurance requirements, that written warranty register is often the difference between keeping your coverage and losing it.
We serve all of Jensen Beach, from the canal-front streets off NE Osprey Street to the mainland neighborhoods along Jensen Beach Boulevard and Savannah Road. A live person answers our phone 24/7, and the person who answers knows our work. Dale Kessler, who founded TruePane in 2008, still runs the board: if the pane is not true, the job is not done. Our background-checked, uniformed technicians measure every opening twice and quote manufacturer lines side by side on paper, so you see exactly what you’re paying for.
Our Door Installation Services in Jensen Beach
Entry & Swing Doors
Most Jensen Beach entry doors fail at the threshold before the door itself goes bad. Galvanic corrosion between stainless screws and aluminum threshold plates creates pitting and jamb rot within eight to ten years on lagoon-facing exposures. We replace old entry systems with fusion-welded vinyl or reinforced fiberglass frames, stainless hinges, and stainless threshold screws, so the metals don’t fight each other in the salt air. A typical entry door replacement in Jensen Beach runs $1,800 to $4,200, depending on impact rating and frame material.
Double & French Doors
Double doors face the same salt problems with twice the hardware. We’ve replaced salt-corroded aluminum sliders with impact-rated Andersen French doors on canal-front homes off NE Osprey Street, where the original multi-point lock had seized and the sash frame was pitted within fifteen years. Our crew installed fusion-welded vinyl frames with stainless steel hinges and full marine-grade flashing tape, rehung on a jamb that carries a 20-year transferable warranty against salt corrosion. A double French door retrofit in Jensen Beach typically runs $3,500 to $7,800, with the higher end covering impact-rated glass and a fully flashed rough opening.
Bifold & Folding Doors
Folding door systems in Jensen Beach carry salt exposure on every panel hinge and roller track. We spec marine-grade stainless for all moving parts and use sealed track assemblies that don’t collect salt crystal buildup the way uncoated brass internals do. A three-panel folding door system on a lagoon-facing patio typically runs $6,000 to $12,000, depending on panel count and glass spec. Most jobs go in during a single visit.
Pivot Doors
Pivot doors are growing in Jensen Beach’s mid-2000s rebuilds, where homeowners want a contemporary entry on a concrete block home. The pivot hardware takes the entire door weight at a single hinge point, so we specify stainless pivots and reinforced header structures rated for Martin County wind loads. A custom pivot door installation in Jensen Beach generally starts around $4,500 and can reach $10,000 or more depending on size, swann weight, and impact glazing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jensen Beach
We’re an authorized installer for PGT, CGI, and Ply Gem, and we service those lines plus, and ES Windows. For Jensen Beach customers, we keep local parts on hand for the brands most common in this market: PGT and CGI impact door hardware, stainless replacement hinges, and marine-grade threshold kits. That means fewer return visits and less waiting when a four-point inspection flags a corroded frame or failed IG unit seal. We quote manufacturer lines side by side on paper, so you can see the difference between a PGT impact door and a CGI equivalent, with warranty durations listed next to each.
Common Door Installation Problems We See in Jensen Beach Homes
- Galvanic corrosion at the threshold. Stainless screws set into aluminum threshold plates create a corrosion cell in salt air. Within eight to ten years on lagoon-facing doors, you get pitting, jamb rot, and a door that won’t seal. We use all-stainless threshold assemblies to eliminate the metal mismatch.
- IG unit seal failure on impact doors. Salt-laden air seeps around weatherstripping and attacks the spacer bars in insulated glass units. The result is fogged glass and lost argon fill, which kills the energy performance of an otherwise intact impact door. We spec double-weatherstripped frames with marine-grade gaskets on replacement doors.
- Seized multi-point lock hardware. Older jalousie and slider replacements often used uncoated brass internals in locks and hinges. Salt crystal buildup jams them within a decade. We use hardware with coated or stainless internals on every Jensen Beach install.
- Wind-load failure on doors that predate 2004 codes. Jensen Beach took near-direct hits from Hurricanes Frances and Jeanne within 26 days in 2004. Many doors installed before that year don’t meet Martin County’s wind-borne debris requirements. A permitted replacement triggers the code upgrade. We pull permits and pass inspections as standard practice.
Pricing for Door Installation in Jensen Beach, FL
We Also Serve Cities Near Jensen Beach
Our crews work throughout the Treasure Coast. We serve Jensen Beach, Stuart, Palm City, Port Salerno, and Hobe Sound. Same standard applies everywhere we go: written quotes, registered warranties, and a live person on the phone.
Serving Jensen Beach, FL - Our Local Coverage Area
We’re based in the Jensen Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Jensen Beach
Any permitted replacement door in Jensen Beach must be impact-rated or protected by shutters to meet Martin County’s wind-borne debris code. Replacement doors trigger the code requirement because the opening is considered a structural element. If you replace one door, the new door has to carry an impact rating or the opening has to be shutter-ready. Call (754) 324-4646 and we’ll walk you through your specific situation.
Aluminum door frames on Hutchinson Island typically show visible pitting within ten to twelve years, while mainland lagoon-facing frames reach the same condition in roughly fifteen years. The barrier island gets direct Atlantic salt spray on top of lagoon air, so exposure is higher. We’ve pulled aluminum sliders off canal-front homes where the frame was structurally compromised at year twelve and the homeowner had no idea until a four-point inspection flagged it.
Three things fail on pre-2004 door frames in Jensen Beach: galvanic corrosion at the threshold where stainless screws meet aluminum plates, IG unit seal failure from salt penetration around weatherstripping, and seized multi-point lock hardware from uncoated brass internals. The corrosion and seal failures are visible to an inspector. The lock seizure will be felt the next time you try to open a door that hasn’t moved in months. We replace all three with stainless, marine-grade hardware and double-weatherstripped frames.
A fusion-welded vinyl frame has no screws or fasteners in the corners where salt water collects. A mechanically fastened frame has metal screws at every corner joint, and those screws are exactly where salt-laden air and standing water cause pitting and seal failure first. In Jensen Beach’s two-direction salt exposure, the fusion-welded frame eliminates the failure point entirely. The cost difference is small; the lifespan difference is ten-plus years.
Low-E glass and argon fill matter for every door in Jensen Beach that gets afternoon sun from the west or southwest. They cut solar heat gain by a measurable margin and reduce the load on your AC. But they only perform if the IG unit seal is intact. When salt air penetrates the weatherstripping and attacks the spacer bar, argon leaks out and Low-E becomes a coating on a fogged pane. We spec Low-E with argon on impact doors and double up the weatherstripping specifically because the salt air here degrades seals faster than wind load alone. Call (754) 324-4646 for a door quote that covers both code and the salt problem.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jensen Beach and the Treasure Coast.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.